plan9front.git - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2020-09-13	kernel: massive pci code rewrite	cinap_lenrek
	The new pci code is moved to port/pci.[hc] and shared by all ports. Each port has its own PCI controller implementation, providing the pcicfgrw() functions for low level pci config space access. The locking for pcicfgrw() is now done by the caller (only port/pci.c). Device drivers now need to include "../port/pci.h" in addition to "io.h". The new code now checks bridge windows and membars, while enumerating the bus, giving the pc driver a chance to re-assign them. This is needed because some UEFI implementations fail to assign the bars for some devices, so we need to do it outselfs. (See pcireservemem()). While working on this, it was discovered that the pci code assimed the smallest I/O bar size is 16 (pcibarsize()), which is wrong. I/O bars can be as small as 4 bytes. Bit 1 in an I/O bar is also reserved and should be masked off, making the port mask: port = bar & ~3;
2020-06-06	pc/vga*: use 64-bit physical addresses and check pci membar types and sizes	cinap_lenrek

2013-01-02	vga: make kernel vga drivers more stupid	cinap_lenrek
	previously, we had to maintain 3 sets of pci vid/did's: 1) in /lib/vgadb for detection 2) in the userspace driver in aux/vga 3) in the kernel mode driver this change makes the kernel mode driver more dumb in the cases where possible. we let userspace do the pci enumeration and if needed, it can set the pci address of the vga card. kernel mode drivers can assume to get the right pci device passed in scr->pci for enable() and linear() functions and just do very basic sanity checking before mapping framebuffer and mmio regions. vgalinearpciid() was removed as userspace is responsible to pick pci device. theres a new vgactl message "pcidev" where userspace can set the bus address. we initialize scr->pci in vgareset() to the first pci graphics card found. this should cover cases when an old aux/vga binary is used that doesnt use the new pcidev message. userspace drivers will now use the pci device that got a match from /lib/vgadb and skip ther own enumeration. this way, vga cards can be made to work by simply adding an entry in vgadb with no need to modify userspace or kernelspace drivers. this is not always possible if the driver derives information from the specific card model.
2012-08-10	vgavmware: fix hardware acceleration (fill is not available with SVGA2)	cinap_lenrek

2011-03-30	Import sources from 2011-03-30 iso image - lib	Taru Karttunen

2011-03-30	Import sources from 2011-03-30 iso image	Taru Karttunen