1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
|
#include "u.h"
#include "../port/lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "io.h"
/*
* SMBus support for the PIIX4
*/
enum
{
IntelVendID= 0x8086,
Piix4PMID= 0x7113, /* PIIX4 power management function */
/* SMBus configuration registers (function 3) */
SMBbase= 0x90, /* 4 byte base address (bit 0 == 1, bit 3:1 == 0) */
SMBconfig= 0xd2,
SMBintrselect= (7<<1),
SMIenable= (0<<1), /* interrupts sent to SMI# */
IRQ9enable= (4<<1), /* interrupts sent to IRQ9 */
SMBenable= (1<<0), /* 1 enables */
/* SMBus IO space registers */
Hoststatus= 0x0, /* (writing 1 bits reset the interrupt bits) */
Failed= (1<<4), /* transaction terminated by KILL */
Bus_error= (1<<3), /* transaction collision */
Dev_error= (1<<2), /* device error interrupt */
Host_complete= (1<<1), /* host command completion interrupt */
Host_busy= (1<<0), /* */
Slavestatus= 0x1, /* (writing 1 bits reset) */
Alert_sts= (1<<5), /* someone asserted SMBALERT# */
Shdw2_sts= (1<<4), /* slave accessed shadow 2 port */
Shdw1_sts= (1<<3), /* slave accessed shadow 1 port */
Slv_sts= (1<<2), /* slave accessed shadow 1 port */
Slv_bsy= (1<<0),
Hostcontrol= 0x2,
Start= (1<<6), /* start execution */
Cmd_prot= (7<<2), /* command protocol mask */
Quick= (0<<2), /* address only */
Byte= (1<<2), /* address + cmd */
ByteData= (2<<2), /* address + cmd + data */
WordData= (3<<2), /* address + cmd + data + data */
Kill= (1<<1), /* abort in progress command */
Ienable= (1<<0), /* enable completion interrupts */
Hostcommand= 0x3,
Hostaddress= 0x4,
AddressMask= (0x7f<<1), /* target address */
Read= (1<<0), /* 1 == read, 0 == write */
Hostdata0= 0x5,
Hostdata1= 0x6,
Blockdata= 0x7,
Slavecontrol= 0x8,
Alert_en= (1<<3), /* enable inter on SMBALERT# */
Shdw2_en= (1<<2), /* enable inter on external shadow 2 access */
Shdw1_en= (1<<1), /* enable inter on external shadow 1 access */
Slv_en= (1<<0), /* enable inter on access of host ctlr slave port */
Shadowcommand= 0x9,
Slaveevent= 0xa,
Slavedata= 0xc,
};
static struct
{
int rw;
int cmd;
int len;
int proto;
} proto[] =
{
[SMBquick] { 0, 0, 0, Quick },
[SMBsend] { 0, 1, 0, Byte },
[SMBbytewrite] { 0, 1, 1, ByteData },
[SMBwordwrite] { 0, 1, 2, WordData },
[SMBrecv] { Read, 0, 1, Byte },
[SMBbyteread] { Read, 1, 1, ByteData },
[SMBwordread] { Read, 1, 2, WordData },
};
static void
transact(SMBus *s, int type, int addr, int cmd, uchar *data)
{
int tries, status;
char err[256];
if(type < 0 || type > nelem(proto))
panic("piix4smbus: illegal transaction type %d", type);
if(waserror()){
qunlock(s);
nexterror();
}
qlock(s);
/* wait a while for the host interface to be available */
for(tries = 0; tries < 1000000; tries++){
if((inb(s->base+Hoststatus) & Host_busy) == 0)
break;
sched();
}
if(tries >= 1000000){
/* try aborting current transaction */
outb(s->base+Hostcontrol, Kill);
for(tries = 0; tries < 1000000; tries++){
if((inb(s->base+Hoststatus) & Host_busy) == 0)
break;
sched();
}
if(tries >= 1000000){
snprint(err, sizeof(err), "SMBus jammed: %2.2ux", inb(s->base+Hoststatus));
error(err);
}
}
/* set up for transaction */
outb(s->base+Hostaddress, (addr<<1)|proto[type].rw);
if(proto[type].cmd)
outb(s->base+Hostcommand, cmd);
if(proto[type].rw != Read){
switch(proto[type].len){
case 2:
outb(s->base+Hostdata1, data[1]);
/* fall through */
case 1:
outb(s->base+Hostdata0, data[0]);
break;
}
}
/* reset the completion/error bits and start transaction */
outb(s->base+Hoststatus, Failed|Bus_error|Dev_error|Host_complete);
outb(s->base+Hostcontrol, Start|proto[type].proto);
/* wait for completion */
status = 0;
for(tries = 0; tries < 1000000; tries++){
status = inb(s->base+Hoststatus);
if(status & (Failed|Bus_error|Dev_error|Host_complete))
break;
sched();
}
if((status & Host_complete) == 0){
snprint(err, sizeof(err), "SMBus request failed: %2.2ux", status);
error(err);
}
/* get results */
if(proto[type].rw == Read){
switch(proto[type].len){
case 2:
data[1] = inb(s->base+Hostdata1);
/* fall through */
case 1:
data[0] = inb(s->base+Hostdata0);
break;
}
}
qunlock(s);
poperror();
}
static SMBus smbusproto =
{
.transact = transact,
};
/*
* return 0 if this is a piix4 with an smbus interface
*/
SMBus*
piix4smbus(void)
{
Pcidev *p;
static SMBus *s;
if(s != nil)
return s;
p = pcimatch(nil, IntelVendID, Piix4PMID);
if(p == nil)
return nil;
s = malloc(sizeof(*s));
if(s == nil)
panic("piix4smbus: no memory for SMBus");
memmove(s, &smbusproto, sizeof(*s));
s->arg = p;
/* disable the smbus */
pcicfgw8(p, SMBconfig, IRQ9enable|0);
/* see if bios gave us a viable port space */
s->base = pcicfgr32(p, SMBbase) & ~1;
print("SMB base from bios is 0x%lux\n", s->base);
if(ioalloc(s->base, 0xd, 0, "piix4smbus") < 0){
s->base = ioalloc(-1, 0xd, 2, "piix4smbus");
if(s->base < 0){
free(s);
print("piix4smbus: can't allocate io port\n");
return nil;
}
print("SMB base ialloc is 0x%lux\n", s->base);
pcicfgw32(p, SMBbase, s->base|1);
}
/* disable SMBus interrupts, abort any transaction in progress */
outb(s->base+Hostcontrol, Kill);
outb(s->base+Slavecontrol, 0);
/* enable the smbus */
pcicfgw8(p, SMBconfig, IRQ9enable|SMBenable);
return s;
}
|
