remove sys/lib/dist.old

48 files changed, 0 insertions, 2415 deletions

diff --git a/sys/lib/dist.old/pc/inst/bootfloppy b/sys/lib/dist.old/pc/inst/bootfloppy
deleted file mode 100755
index c9aebbc51..000000000
--- a/sys/lib/dist.old/pc/inst/bootfloppy
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/rc
-
-rfork e
-
-echo
-echo 'Insert a disk other than your installation boot disk'
-echo 'into your floppy drive; it will be erased to create'
-echo 'the boot floppy.'
-echo
-echo -n 'Press enter when ready.'
-read >/dev/null >[2]/dev/null
-
-if(~ $#adisk 1)
-	;	# do nothing
-if not if(~ $#bootfile 0)
-	adisk=/dev/fd0disk
-if not {
-	switch($bootfile) {
-	case sd*
-		adisk=`{echo $bootfile | sed 's#(sd..).*#/dev/\1/data#'}
-	case fd*
-		adisk=`{echo $bootfile | sed 's#(fd.).*#/dev/\1disk#'}
-	case *
-		echo 'unknown bootfile '^$bootfile^'; mail 9trouble@plan9.bell-labs.com'
-		exit oops
-	}
-}
-
-if(! ~ `{ls -l $adisk | awk '{print $6}'} 1474560){
-	echo 'Will not format non-floppy disk '^$"adisk. >[1=2]
-	exit 'bad adisk'
-}
-
-log Formatting boot floppy
-if (test -e  /n/newfs/386/9loadnousb)
-	bind /n/newfs/386/9loadnousb /n/newfs/386/9load	# cater to old bioses
-disk/format -b /386/pbs \
-	-fd $adisk /n/newfs/386/9load /n/newfs/386/9pcdisk.gz \
-	/tmp/plan9ini.bak
-x=$status
-
-if(~ $x ''){
-	echo 
-	echo 'Done!'
-	echo
-}
-exit $x
diff --git a/sys/lib/dist.old/pc/inst/bootplan9 b/sys/lib/dist.old/pc/inst/bootplan9
deleted file mode 100755
index 942c043b0..000000000
--- a/sys/lib/dist.old/pc/inst/bootplan9
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/rc
-
-first=`{ls -p '#S' | sed 1q}
-if(! ~ $first $disk) {
-	echo 'warning: The plan 9 partition is not on the boot disk,'
-	echo 'so making it the active partition will have no effect.'
-}
-
-p9offset=`{grep '^part 9fat ' /dev/$disk/ctl |awk '{print $3}'}
-if(! ~ $#p9offset 1) {
-	echo 'could not find plan 9 partition.'
-	echo 'cannot happen'
-	exit bad
-}
-
-if(test $p9offset -gt 4128695) {	# 65536 * 63 - 10
-	echo 
-	echo 'Your Plan 9 partition is more than 2GB into your disk,'
-	echo 'and the master boot records used by Windows 9x/ME'
-	echo 'cannot access it (and thus cannot boot it).'
-	echo
-	echo 'You can install the Plan 9 master boot record, which can load'
-	echo 'partitions far into the disk.'
-	echo 
-}
-
-echo 'If you use the Windows NT/2000/XP master boot record'
-echo 'or a master boot record from a Unix clone (e.g., LILO or'
-echo 'FreeBSD bootmgr), it is probably safe to continue using'
-echo 'that boot record rather than install the Plan 9 boot record.'
-echo
-prompt 'Install the Plan 9 master boot record' y n 
-switch($rd) {
-case n
-	;
-case y
-	disk/mbr -m /386/mbr /dev/$disk/data
-}
-
-log Setting Plan 9 partition active.
-p9part=`{disk/fdisk /dev/$disk/data >[2]/dev/null </dev/null | 
-		grep PLAN9 | sed 1q | sed 's/ *(p.) .*/\1/'}
-if(~ $#p9part 0){
-	echo 'You have no Plan 9 partitions (How could this happen?)' >[1=2]
-	exit 'no plan 9 partition found'
-}
-p9part=$p9part(1)
-{ echo 'A '^$p9part; echo w } | disk/fdisk /dev/$disk/data >[2]/dev/null >/dev/null
-x=$status
-if(~ $x '' '|'){
-	echo
-	echo 'The Plan 9 partition is now marked as active.'
-	exit ''
-}
-exit $x
diff --git a/sys/lib/dist.old/pc/inst/bootsetup b/sys/lib/dist.old/pc/inst/bootsetup
deleted file mode 100755
index cc22fe6ee..000000000
--- a/sys/lib/dist.old/pc/inst/bootsetup
+++ /dev/null
@@ -1,125 +0,0 @@
-#!/bin/rc
-
-# desc: create a boot floppy or configure hard disk to boot plan 9
-# prereq: copydist
-
-switch($1) {
-case go
-	echo
-	echo 'Initializing Plan 9 FAT configuration partition (9fat)'
-	echo
-	
-	fat=(/dev/sd*/9fat)
-	fat=$fat(1)
-	disk=`{echo $fat | sed 's:/dev/::;s:/9fat::'}
-	bootfs=`{echo $fs | sed 's:/dev/(sd..)/(.*):\1!\2:'}
-	bootfat=`{echo $fs | sed 's:/dev/(sd..)/(.*):\1!9fat:'}
-	if(! test -f /dev/$disk/9fat) {
-		echo 'You have no 9fat partition.  Can''t setup booting.'
-		exit
-	}
-
-	if(! test -f /tmp/plan9.ini) {
-		{
-			sfs=`{echo $fs | sed 's;/dev;#S;'}
-			if(~ $fstype fossil fossil+venti){
-				echo bootfile'='$bootfat!9pcf
-				echo 'bootargs=local!'^$sfs
-				echo 'bootdisk=local!'^$sfs
-			}
-			if not {
-				echo bootfile'='$bootfs!/386/9pcdisk
-				echo 'bootdisk=local!'^$sfs
-			}
-			if(~ $fstype fossil+venti){
-				venti=`{echo $ventiarena | sed 's;/dev;#S;'}
-				echo venti'='^$venti
-			}
-			# sort -u avoids dups which could otherwise trigger
-			# pointless boot menus.
-			grep -v '(^\[)|menuitem|adisk|bootfile|bootdisk|bootargs|nobootprompt|mouseport|vgasize|monitor|cdboot' /tmp/plan9.orig |
-				sort -u
-			echo 'mouseport='^$mouseport
-			echo 'monitor='^$monitor
-			echo 'vgasize='^$vgasize
-		} >/tmp/plan9.ini
-	}
-	if(! test -f /tmp/plan9ini.bak)
-		cp /tmp/plan9.ini /tmp/plan9ini.bak
-
-	need9fatformat=no
-	if(! isfat /dev/$disk/9fat)
-		need9fatformat=yes
-	if not if(! mount -c /srv/dos /n/9fat /dev/$disk/9fat >[2]/dev/null)
-		need9fatformat=yes
-	if not if(! test -f /n/9fat/plan9.ini)
-		need9fatformat=yes
-
-	if (test -e  /n/newfs/386/9loadnousb)
-		bind /n/newfs/386/9loadnousb /n/newfs/386/9load	# cater to old bioses
-	if(~ $need9fatformat yes){
-		log Initializing Plan 9 FAT partition.
-		disk/format -r 2 -d -b /386/pbs \
-			/dev/$disk/9fat /n/newfs/386/9load
-		# silently install pbslba if the partition is way into the disk.
-		# it''s our only hope.  only need this for >8.5GB into the disk.
-		# but...
-		# there are so few non-LBA bioses out
-		# there anymore that we'll do this even if we're only 2GB into
-		# the disk.  it's just not worth the headaches of dealing with
-		# crappy bioses that don't address the whole 8.5GB properly
-
-		9fatoffset=`{grep '^part 9fat ' /dev/$disk/ctl | awk '{print $4}'}
-		if(! ~ $#9fatoffset 1) {
-			echo 'could not find plan 9 partition.'
-			echo 'cannot happen'
-			exit bad
-		}
-		if(test $9fatoffset -gt 2097152)	# 2GB
-			disk/format -b /386/pbslba /dev/$disk/9fat
-
-		mount -c /srv/dos /n/9fat /dev/$disk/9fat
-	}
-
-	if(! test -f /n/9fat/4e){
-		logprog cp /n/newfs/386/9load /n/9fat/9load
-		logprog cp /n/newfs/386/9pcf /n/9fat/9pcf
-		if(test -f /n/9fat/plan9.ini && ! test -f /n/9fat/plan9-3e.ini)
-			logprog mv /n/9fat/plan9.ini /n/9fat/plan9-3e.ini
-		if(test -f /n/9fat/9pcdisk && ! test -f /n/9fat/9pc3e)
-			logprog mv /n/9fat/9pcdisk /n/9fat/9pc3e
-
-		awk -f /bin/inst/mkini.awk >/n/9fat/plan9.ini
-		>/n/9fat/4e
-	}
-
-	echo
-	echo 'There are myriad ways to boot a Plan 9 system.'
-	echo 'You can use any of the following.'
-	echo
-	echo '  floppy - create a boot floppy'
-	echo '  plan9  - make the plan 9 disk partition the default for booting'
-	echo '  win9x  - add a plan 9 option to windows 9x boot menu'
-	echo '  winnt  - add a plan 9 option to windows nt/2000/xp boot manager'
-	echo
-	echo 'If you are upgrading an extant third edition installation and booting'
-	echo 'from something other than a floppy, you needn''t run anything here.'
-	echo 'Just type ctl-d.'
-
-	oldbootsetup=$didbootsetup
-	didbootsetup=1
-	export didbootsetup
-	prompt 'Enable boot method' floppy plan9 win9x winnt
-	
-	if(! boot$rd){
-		didbootsetup=$oldbootsetup
-		export didbootsetup
-	}
-
-case checkdone
-	xxxfat=(/dev/sd*/9fat)
-	if(! isfat $xxxfat(1) || ! ~ $didbootsetup 1){
-		bootsetup=ready
-		export bootsetup
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/bootwin9x b/sys/lib/dist.old/pc/inst/bootwin9x
deleted file mode 100755
index 68c2d1923..000000000
--- a/sys/lib/dist.old/pc/inst/bootwin9x
+++ /dev/null
@@ -1,117 +0,0 @@
-#!/bin/rc
-
-dosdisk=`{ls /dev/sd??/dos >[2]/dev/null | sed 1q | sed 's!.*/(.*)/dos!\1!'}
-if(~ $#dosdisk 0 || ! c: || ! test -f /n/c:/autoexec.bat || ! test -f /n/c:/config.sys) {
-	echo 'Could not find autoexec.bat or config.sys on the first FAT disk.'
-	exit bad
-}
-
-for (i in autoexec config msdos)
-	if(test -f /n/c:/$i.p9) {
-		echo 'A Plan 9 backup already exists; will not edit system files again.'
-		exit bad
-	}
-
-for (i in autoexec.bat config.sys msdos.sys)
-	if(! cp /n/c:/$i /n/c:/^`{echo $i | sed 's/\.(bat|sys)$/.p9/'}) {
-		echo 'Could not back up '^$i^'; will not continue.'
-		exit bad
-	}
-
-if(! test -d /n/c:/plan9 && ! mkdir /n/c:/plan9) {
-	echo 'Could not create directory /n/c:/plan9.'
-	exit bad
-}
-
-if(! cp /n/newfs/386/^(9load ld.com 9pcdisk) /tmp/plan9ini.bak /n/c:/plan9) {
-	echo 'Could not copy Plan 9 boot files into /n/c:/plan9.'
-	exit bad
-}
-
-chmod +w /n/c:/autoexec.bat /n/c:/config.sys /n/c:/msdos.sys
-
-if(grep -si 'Plan ?9' /n/c:/config.sys || grep -si 'Plan ?9' /n/c:/autoexec.bat) {
-	echo 'Plan 9 entries already in config.sys or autoexec.bat.'
-	echo 'Not changing them; refer to Plan 9 install documentation'
-	echo 'to configure manually.'
-	exit bad
-}
-
-if(! grep -si '\[menu\]' /n/c:/config.sys) {
-	{
-		echo 1
-		echo i
-		echo '[menu]
'
-		echo 'menuitem=windows, Windows
'
-		echo 'menudefault=windows
'
-		echo '
'
-		echo '[common]
'
-		echo '
'
-		echo '[windows]
'
-		echo .
-		echo w
-		echo q
-	} | ed /n/c:/config.sys >/dev/null >[2]/dev/null
-}
-
-{
-	echo 1
-	echo '/\[[Mm][Ee][Nn][Uu]\]'
-	echo '?^[Mm][Ee][Nn][Uu][Ii][Tt][Ee][Mm]='
-	echo a
-	echo 'menuitem=plan9, Plan 9 from Bell Labs
'
-	echo .
-	echo '$'
-	echo a
-	echo '
'
-	echo '[plan9]
'
-	echo '
'
-	echo .
-	echo w
-	echo q
-} | ed /n/c:/config.sys >/dev/null>[2]/dev/null
-
-{
-	echo 1
-	echo i
-	echo '@echo off
'
-	echo 'if %config%==plan9 goto plan9
'
-	echo 'goto notplan9
'
-	echo ':plan9
'
-	echo 'plan9\ld '^$dosdisk^'!dos!plan9/9load
'
-	echo ':notplan9
'
-	echo .
-	echo w
-	echo q
-} | ed /n/c:/autoexec.bat >/dev/null>[2]/dev/null
-
-fn zeroopt {
-	if(grep -s '^'^$1^'=1' /n/c:/msdos.sys) {
-		{
-			echo '/^'^$1^'=1/s/=1/=0/'
-			echo w
-			echo q
-		} | ed /n/c:/msdos.sys>/dev/null>[2]/dev/null
-	}
-	if not if (grep -s '^'^$1^'=0' /n/c:/msdos.sys)
-		;
-	if not {
-		{
-			echo 1
-			echo i
-			echo '[Options]
'
-			echo 'Logo=0
'
-			echo .
-			echo w
-			echo q
-		} | ed /n/c:/msdos.sys>/dev/null>[2]/dev/null
-	}
-}
-
-if(grep -si '^\[paths\]' /n/c:/msdos.sys){	# Windows 9x rather than DOS
-	zeroopt Logo
-#	zeroopt BootGUI
-}
-		
-echo 'Plan 9 added to Windows 9X boot menu.'
-exit ''
diff --git a/sys/lib/dist.old/pc/inst/bootwinnt b/sys/lib/dist.old/pc/inst/bootwinnt
deleted file mode 100755
index ee92f5d76..000000000
--- a/sys/lib/dist.old/pc/inst/bootwinnt
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/rc
-
-if(! c: || ! test -f /n/c:/boot.ini) {
-	echo 'Could not find NT''s boot.ini on the first FAT disk.'
-	exit bad
-}
-
-if(test -f /n/c:/boot.p9) {
-	echo 'A Plan 9 backup already exists; will not edit boot.ini again.'
-	exit bad
-}
-
-if(! cp /n/c:/boot.ini /n/c:/boot.p9) {
-	echo 'Could not back up boot.ini; will not continue.'
-	exit bad
-}
-
-chmod +w /n/c:/boot.ini
-
-if(! grep -si '\[operating systems\]' /n/c:/boot.ini) {
-	echo 'Could not parse boot.ini.'
-	exit bad
-}
-
-if(grep -si 'Plan 9' /n/c:/boot.ini) {
-	p9file=`{grep 'Plan 9' /n/c:/boot.ini | sed 1q | sed 's/=.*//'}
-	if(! ~ $p9file [Cc]:'\'*) {
-		echo 'Unexpected Plan 9 entry in boot.ini already; not continuing.'
-		exit bad
-	}
-}
-
-if not {
-	p9file='c:\bootsect.p9'
-	echo 'c:\bootsect.p9 = "Plan 9 from Bell Labs"
' >>/n/c:/boot.ini
-}
-
-p9file=/n/^`{echo $p9file | sed 's!\\!/!g'}
-
-
-if(dd -if /dev/$disk/plan9 -bs 512 -count 1 -of $p9file >/dev/null >[2]/dev/null) {
-	echo 'Plan 9 added to Windows NT boot menu.'
-	exit ''
-}
-
-echo 'Error copying Plan 9 boot sector to file.'
-exit bad
diff --git a/sys/lib/dist.old/pc/inst/configarch b/sys/lib/dist.old/pc/inst/configarch
deleted file mode 100755
index 61912bfdb..000000000
--- a/sys/lib/dist.old/pc/inst/configarch
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/rc
-
-# desc: set source of distribution archives
-# prereq: mountfs
-
-switch($1) {
-case go
-	echo
-	echo 'Will you be using a distribution archive on local media or the internet?'
-	echo
-
-	prompt 'Distribution is from' local internet
-	archmedium=$rd
-	export archmedium
-
-	switch($archmedium) {
-	case local
-		exec configlocal go
-	case internet
-		exec configip go
-	}
-
-case checkdone
-	switch($#archmedium) {
-	case 1
-		switch($archmedium) {
-		case local
-			exec configlocal checkdone
-		case internet
-			exec configip checkdone
-		case *
-			configarch=notdone
-			export configarch
-		}
-	case *
-		configarch=notdone
-		export configarch
-	}
-}
-		
diff --git a/sys/lib/dist.old/pc/inst/configdist b/sys/lib/dist.old/pc/inst/configdist
deleted file mode 100755
index 3e99bea0d..000000000
--- a/sys/lib/dist.old/pc/inst/configdist
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/rc
-
-# prereq: mountfs
-# desc: choose the source of the distribution archive
-
-switch($1){
-case checkdone
-	if(! ~ $distisfrom net local){
-		configdist=ready
-		export configdist
-	}
-
-case go
-	echo 'Are you going to download the distribution'
-	echo 'from the internet or do you have it on local media?'
-	echo
-	prompt -d local 'Distribution is from' local net
-	distisfrom=$rd
-	export distisfrom
-}
-
-
diff --git a/sys/lib/dist.old/pc/inst/configether b/sys/lib/dist.old/pc/inst/configether
deleted file mode 100755
index 0922ea339..000000000
--- a/sys/lib/dist.old/pc/inst/configether
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/rc
-
-# desc: configure your internet connection via an ethernet card
-
-switch($1) {
-case go
-	echo
-	echo 'Please choose a method for configuring your ethernet connection.'
-	echo
-	echo '	manual - specify IP address, network mask, gateway IP address'
-	echo '	dhcp - use DHCP to automatically configure'
-	echo
-	
-	prompt 'Configuration method' manual dhcp
-	ethermethod=$rd
-	gwaddr=xxx
-	ipaddr=xxx
-	ipmask=xxx
-	switch($ethermethod){
-	case dhcp
-		echo
-		echo 'Some ISPs, notably @HOME, require a host name passed with DHCP'
-		echo 'requests.  An example for @HOME would be "cc1018221-a".  If your'
-		echo 'ISP supplied you such a name, enter it.'
-		echo
-		prompt -d none 'host name'; dhcphost=$rd
-		switch($dhcphost){
-		case none
-			dhcphost=();
-		case *
-			dhcphost=(-h $dhcphost)
-		}
-		export dhcphost
-	case manual
-		prompt 'ip address'; ipaddr=$rd
-		prompt 'network mask'; ipmask=$rd
-		prompt 'gateway address'; gwaddr=$rd
-		export ipaddr ipmask gwaddr
-	}
-	
-	export ethermethod gwaddr ipaddr ipmask dhcphost
-	exec startether go
-
-case checkdone
-	if(! ~ $ethermethod manual dhcp) {
-		configether=notdone
-		export configether
-	}
-	if(~ $ethermethod manual && ~ 0 $#ipaddr $#ipmask $#gwaddr) {
-		configether=notdone
-		export configether
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/configfs b/sys/lib/dist.old/pc/inst/configfs
deleted file mode 100755
index 81f82897c..000000000
--- a/sys/lib/dist.old/pc/inst/configfs
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/rc
-
-# desc: choose the type of file system to install
-
-switch($1){
-case checkdone
-	if(! ~ $fstype fossil fossil+venti){
-		configfs=ready
-		export configfs
-	}
-
-case go
-	echo 'You can install the following types of file systems:'
-	echo
-	echo '	fossil			the new Plan9 fileserver'
-	echo '	fossil+venti	fossil + a archival dump server'
-	echo
-	prompt -d fossil 'File system' fossil fossil+venti
-	fstype=$rd
-	export fstype
-}
-
-
diff --git a/sys/lib/dist.old/pc/inst/configip b/sys/lib/dist.old/pc/inst/configip
deleted file mode 100755
index a7873c9f1..000000000
--- a/sys/lib/dist.old/pc/inst/configip
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/rc
-
-switch($1) {
-case go
-
-	devs=''
-	if(test -d '#l/ether0' >[2]/dev/null)
-		devs=$devs^ether
-	if(test -f '#t'/eia? >[2]/dev/null)
-		devs=$devs^ppp
-	
-	switch($devs){
-	case ''
-		echo
-		echo 'Could not find ethernet card nor serial port nor modem.'
-		echo 'Please use a local copy of the distribution archive.'
-		echo
-		ifc=none
-	
-	case ppp
-		echo
-		echo 'No ethernet card was detected, but there is a serial port or modem.'
-		echo 'We will configure PPP.'
-		echo
-		ifc=ppp
-	
-	case ether
-		echo
-		echo 'No serial port or modem detected, but there is an ethernet card.'
-		echo 'We will configure the ethernet.'
-		echo
-		ifc=ether
-	
-	case etherppp
-		echo
-		echo 'You can connect to the internet via'
-		echo 'a local ethernet or a dial-up PPP connection.'
-		echo
-		prompt 'Interface to use' ether ppp
-		ifc=$rd
-	}
-	
-	ipinterface=$ifc
-	export ipinterface
-	
-	switch($ifc) {
-	case ether
-		exec configether go
-	case ppp
-		exec configppp go
-	}
-
-case checkdone
-	if(~ $#ipinterface 1)
-		switch($ipinterface) {
-		case ether
-			exec configether checkdone
-		case ppp
-			exec configppp checkdone
-		}
-	configarch=notdone
-	export configarch
-
-}
diff --git a/sys/lib/dist.old/pc/inst/confignet b/sys/lib/dist.old/pc/inst/confignet
deleted file mode 100755
index 182ed40cb..000000000
--- a/sys/lib/dist.old/pc/inst/confignet
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/rc
-
-# prereq: configdist
-# desc: configure the network to download the distribution
-
-switch($1){
-case checkready checkdone
-	if(! ~ $distisfrom net){
-		confignet=notdone
-		export confignet
-		exit
-	}
-	if(~ $distisfrom net && ~ $netisfrom ppp ether){
-		x=config$netisfrom
-		$x=done
-		config$netisfrom checkdone
-		confignet=$$x
-		export confignet
-		exit
-	}
-	confignet=ready
-	export confignet
-	exit
-
-case go
-	devs=''
-	if(test -d '#l/ether0' >[2]/dev/null)
-		devs=$devs^ether
-	if(test -f '#t'/eia? >[2]/dev/null)
-		devs=$devs^ppp
-	
-	switch($devs){
-	case ''
-		echo
-		echo 'Could not find ethernet card nor serial port nor modem.'
-		echo 'Please use a local copy of the distribution archive.'
-		echo
-		netisfrom=none
-	
-	case ppp
-		echo
-		echo 'No ethernet card was detected, but there is a serial port or modem.'
-		echo 'We will configure PPP.'
-		echo
-		netisfrom=ppp
-	
-	case ether
-		echo
-		echo 'No serial port or modem detected, but there is an ethernet card.'
-		echo 'We will configure the ethernet.'
-		echo
-		netisfrom=ether
-	
-	case etherppp
-		echo
-		echo 'You can connect to the internet via'
-		echo 'a local ethernet or a dial-up PPP connection.'
-		echo
-		prompt 'Interface to use' ether ppp
-		netisfrom=$rd
-	}
-	
-	export netisfrom
-	if(~ $netisfrom ether ppp)
-		exec config$netisfrom go
-}
-
diff --git a/sys/lib/dist.old/pc/inst/configppp b/sys/lib/dist.old/pc/inst/configppp
deleted file mode 100755
index 6bbffc4f0..000000000
--- a/sys/lib/dist.old/pc/inst/configppp
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/rc
-
-# desc: configure your internet connection via ppp over a modem
-
-switch($1) {
-case go
-	devs=`{ls -p '#t/'eia? >[2]/dev/null}
-	if(~ $#devs 0) {
-		echo 'No serial port found; this can''t happen.'	# because configip checks
-		exit
-	}
-	
-	# not going to use the mouse for PPP
-	if(~ eia^$mouseport $devs)
-		devs=`{echo $devs | sed 's/eia'^$mouseport^'//'}
-	
-	if(~ $#devs 0) {
-		echo 'The only serial port you have is your mouse.'
-		echo 'Cannot configure PPP.'
-		exit
-	}
-	
-	echo
-	echo 'Please choose the serial port or modem to use to connect to your ISP.'
-	echo
-	for(i in $devs) {
-		n=`{echo $i | sed 's/eia//'}
-		n=`{hoc -e 1+$n}
-		echo '	'^$i^'(Windows'' COM'^$n^')'
-	}
-	echo
-	prompt 'Serial device' $devs
-	pppdev=$rd
-	
-	echo
-	echo 'Pick a baud rate for the PPP connection.'
-	echo
-	prompt -d 115200 'Baud rate'
-	pppbaud=$rd
-	
-	echo
-	echo 'You can specify your dialup phone number, username, and password,'
-	echo 'or you can log in manually by typing the modem commands yourself.'
-	echo
-	prompt 'Dialing method' auto manual
-	pppmethod=$rd
-	
-	switch($pppmethod){
-	case auto
-		prompt 'PPP phone number'; pppphone=$rd
-		prompt 'PPP phone username'; pppuser=$rd
-		prompt 'PPP phone password'; ppppasswd=$rd
-	}
-	
-	export pppdev pppmethod pppphone ppppasswd pppuser pppbaud
-	exec startppp go
-
-case checkdone
-	if(! ~ $#pppmethod 1 || ! test -f /dev/$pppdev){
-		configppp=notdone
-		export configppp
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/copydist b/sys/lib/dist.old/pc/inst/copydist
deleted file mode 100755
index 507d5602b..000000000
--- a/sys/lib/dist.old/pc/inst/copydist
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/rc
-
-# prereq: mountdist
-# desc: copy the distribution into the file system
-
-switch($1){
-case checkready
-	if(! test -d /n/dist/dist/replica){
-		copydist=notdone
-		export copydist
-		exit
-	}
-	if(test -f /n/newfs/dist/replica/didplan9){
-		copydist=done
-		export copydist
-		exit
-	}
-case go
-	inst/watchfd applylog 0 `{ls -l /n/dist/dist/replica/plan9.log | awk '{print $6}'} 'Installing file system' &
-	replica/pull -c / /rc/bin/inst/replcfg
-	if(~ $status '' *conflicts || test -f /n/newfs/dist/replica/didplan9witherrors)
-		>/n/newfs/dist/replica/didplan9
-	if not
-		>/n/newfs/dist/replica/didplan9witherrors
-
-case checkdone
-	if(! test -f /n/newfs/dist/replica/didplan9){
-		copydist=notdone
-		export copydist
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/defs b/sys/lib/dist.old/pc/inst/defs
deleted file mode 100755
index f9c9454c0..000000000
--- a/sys/lib/dist.old/pc/inst/defs
+++ /dev/null
@@ -1,162 +0,0 @@
-nl='
-'
-tab='	'
-if(~ $#distname 0)
-	distname=plan9
-
-wctl=/dev/null
-if(test -w /dev/wctl)
-	wctl=/dev/wctl
-
-fn log {
-	echo $* >>/srv/log
-}
-
-fn logprog {
-	echo '% '^$"* >>/srv/log
-	$* >[2=1] >>/srv/log
-}
-
-fn sigint {
-	# nothing happens
-}
-
-fn prompt {
-	def=()
-	what=()
-	if(~ $1 -d && ! ~ $#* 1){
-		def=$2
-		shift
-		shift
-	}
-
-	optstr=()
-	if(~ $1 -w && ! ~ $#* 1){
-		optstr=$2
-		shift
-		shift
-	}
-
-	pr=$1
-	shift
-
-	opts=($*)
-	if(~ $#opts 0) {
-		suf=' '
-	}
-	if not if(! ~ $#optstr 0) {
-		if(~ $optstr '') 
-			suf=' '
-		if not {
-			pr=$pr^' ('^$"optstr^')'
-			suf=''
-		}
-	}
-	if not {
-		pr=$pr^' ('^$1
-		shift
-		for(i)
-			pr=$pr^', '^$i
-		pr=$pr^')'
-		suf=''
-	}
-
-	if(~ $#def 1)
-		pr=$pr^$suf^'['^$def^']'
-	if not
-		pr=$pr^$suf^'[no default]'
-
-	pr=$pr^': '
-
-
-	okay=no
-	while(~ $okay no) {
-		echo -n current >$wctl
-		echo -n top >$wctl
-		echo -n $pr >[1=2]
-		ifs='' {rd=`{read}}
-		if(~ $#rd 0)
-			exit notdone
-		if(~ $rd !*){
-			ifs='' {rd=`{echo $rd | sed 's/!//'}}
-			echo $rd
-			rc -c $rd
-			echo !$status
-		}
-		if not{
-			rd=`{echo $rd}
-			if(~ $#rd 0 || ~ $rd '')
-				rd=$def
-	
-			switch($#opts){
-			case 0
-				if(! ~ $rd '')
-					okay=yes
-			case *
-				if(~ $rd $opts)
-					okay=yes
-			}
-		}
-	}
-	echo -n $rd >/env/rd	# just in case
-}
-
-fn desc {
-	echo -n '	'^$1^'	- '
-	grep '^# desc: ' $1 | sed 's/# desc: //'
-}
-
-fn prereq {
-	grep '^# prereq:' $1 | sed 's/# prereq://'
-}
-
-fn mustdo {
-	echo You must `{grep '^# mustdo:' $1 | sed 's/# mustdo://'}
-}
-
-# there's no easy way to pass shell variables
-# up from children to parents; the parents have
-# to be coerced into noticing that the environment
-# changed, even when in the same environment group.
-#
-# instead, we explicitly export the variables we want
-# to percolate, and the parent calls coherence to reread
-# the variables.
-#
-# we just append to the vars file, so that later exports
-# override earlier ones; when we call coherence, 
-# the duplicates are thrown out.
-
-fn export {
-	null=()
-	nonnull=()
-	for(i in $*){
-		if(~ $#$i 0)
-			null=($null $i)
-		if not
-			nonnull=($nonnull $i)
-	}
-	if(! ~ $#nonnull 0)
-		whatis $nonnull |grep -v '^\./' >>/tmp/vars >[2]/dev/null
-	for(i in $null)
-		echo $i^'=()' >>/tmp/vars
-}
-
-fn coherence {
-	if(test -f /tmp/vars) {
-		grep '^[a-z]*=' /tmp/vars >/tmp/vars2
-		v=`{sed 's/^([a-z]*)=.*/\1/' /tmp/vars2 | sort -u}
-		. /tmp/vars2
-		rm /tmp/vars2
-		rm /tmp/vars
-		export $v
-	}
-}
-
-# ip device stats
-
-fn isipdevup {
-	grep -s $1 /net/ipifc/*/status >[2]/dev/null 
-}
-
-
diff --git a/sys/lib/dist.old/pc/inst/download b/sys/lib/dist.old/pc/inst/download
deleted file mode 100755
index 70d7f5ba7..000000000
--- a/sys/lib/dist.old/pc/inst/download
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/rc
-
-# prereq: mountfs
-# desc: download or continue to download the distribution archives
-
-switch($1) {
-case checkready
-	devs=(`{cat /net/ipifc/*/status >[2]/dev/null |
-		grep -v '127\.0\.0\.1' |
-		sed 's/ .*//'})
-	if(~ $#devs 0) {
-		download=notdone
-		export download
-	}
-	if(~ $mountdist done){
-		download=notdone
-		export download
-	}
-
-case go
-	if(! test -f /srv/cs) {
-		log starting cs, dns
-		logprog ndb/cs >>/srv/log >[2=1]
-		logprog ndb/dns -r >>/srv/log >[2=1]
-	}
-	if(! test -f /net/cs) {
-		logprog mount -a /srv/cs /net
-		logprog mount -a /srv/dns /net
-	}
-
-	# BUG make restartable
-	echo 'Downloading distribution package...'
-	baropt='-w 145,129,445,168'
-	if(~ $textinst 1)
-		baropt=-t
-	if(! hget -vo /n/newfs/dist/_plan9.iso.bz2 $installurl/plan9.iso.bz2 |[2] bargraph $baropt 'downloading '^plan9.iso.bz2)
-			exit
-	mv /n/newfs/dist/_plan9.iso.bz2 /n/newfs/dist/plan9.iso.bz2
-	if(~ $fstype fossil){
-		echo fsys main sync >>/srv/fscons
-	}
-
-	echo 'The distribution is downloaded.'
-
-	srvmedia=()
-	mountmedia=(mount /srv/fossil /n/distmedia)
-	distmediadir=/dist
-	export distmediadir mountmedia distmedia
-	
-case checkdone
-	if(! test -f /n/newfs/dist/plan9.iso.bz2) {
-		download=notdone
-		export download
-	}
-}
-
diff --git a/sys/lib/dist.old/pc/inst/finish b/sys/lib/dist.old/pc/inst/finish
deleted file mode 100755
index e616e64e1..000000000
--- a/sys/lib/dist.old/pc/inst/finish
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/rc
-
-# desc: finish the installation and reboot
-# prereq: bootsetup
-# mustdo: 
-
-switch($1) {
-case checkdone
-	finish=ready
-	export finish
-
-case go
-	if(~ $cdboot yes){
-		echo 'Congratulations; you''ve completed the install.'
-		echo
-		halt
-	}
-	stop go finished
-}
diff --git a/sys/lib/dist.old/pc/inst/fmtfossil b/sys/lib/dist.old/pc/inst/fmtfossil
deleted file mode 100755
index 98bf33fc1..000000000
--- a/sys/lib/dist.old/pc/inst/fmtfossil
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/rc
-
-# desc: initialize disks for a fossil server
-# prereq: configfs
-
-switch($1){
-case checkready checkdone
-	if(! ~ $fstype fossil+venti fossil){
-		fmtfossil=notdone
-		export fmtfossil
-		exit
-	}
-	ff=`{ls /dev/sd*/fossil* /dev/fs/fossil* >[2]/dev/null}
-	if(~ $#ff 0){
-		fmtfossil=notdone
-		export fmtfossil
-		exit
-	}
-	gg=()
-	for(f in $ff)
-		if(isfossil $f)
-			gg=($gg $f)
-	if(~ $#gg 0){
-		fmtfossil=ready
-		export fmtfossil
-		exit
-	}
-	fmtfossil=done
-	export fmtfossil
-	exit
-
-case go
-	ff=`{ls /dev/sd*/fossil* /dev/fs/fossil* >[2]/dev/null}
-	if(~ $#ff 0){
-		echo 'You need to create a partition or partitions to hold the Fossil write cache.'
-		echo 'The partition name must begin with "fossil".'
-		echo
-		fmtfossil=notdone
-		export fmtfossil
-		exit
-	}
-	default=()
-	if(~ $#ff 1){
-		default=(-d $ff)
-	}
-	echo You have the following fossil partitions.
-	echo
-	prompt $default 'Fossil partition to format' $ff
-	f=$rd
-
-	do=yes
-	if(isfossil $f){
-		echo $f appears to already be formatted as Fossil file system.
-		echo Do you really want to reformat it?
-		echo
-		prompt -d no 'Reformat '$f yes no
-		do=$rd
-	}
-	if(~ $do yes){
-		fossil/flfmt -y $f
-		n=`{cat /dev/swap | grep ' user' | sed 's/^[0-9]+\/([0-9]+) .*/\1/'}
-		if(test $n -gt 32768)
-			m=3000	# if have at least 128 user MB, use 24MB for fossil
-		if not if(test $n -gt 16384)
-			m=1500	# 64 user MB => 12MB for fossil
-		if not if(test $n -gt 8192)
-			m=750	# 32 user MB => 6MB for fossil
-		if not
-			m=256	# 2MB for fossil (this will be slow)
-
-		# if we're using a venti in the back, take hourly snapshots
-		# that retire after three days, in addition to the daily dumps at 5am
-		if(~ $fstype fossil+venti){
-			v=''
-			snap='fsys main snaptime -s 60 -a 0500 -t 2880'
-		}
-		# otherwise, take the daily dumps but nothing else --
-		# we can't retire snapshots unless dumps are being archived
-		if not{
-			v='-V'
-			snap=''
-		}
-		echo \
-'fsys main config '^$f^'
-fsys main open '^$v^' -c '^$m^'
-'^$snap^'
-'		| fossil/conf -w $f
-	}
-	
-	echo Done.
-}
diff --git a/sys/lib/dist.old/pc/inst/fmtventi b/sys/lib/dist.old/pc/inst/fmtventi
deleted file mode 100755
index db79440ac..000000000
--- a/sys/lib/dist.old/pc/inst/fmtventi
+++ /dev/null
@@ -1,190 +0,0 @@
-#!/bin/rc
-
-# desc: initialize disks for a venti server
-# prereq: mountdist
-
-switch($1){
-case checkready checkdone
-	if(! ~ $fstype fossil+venti){
-		fmtventi=notdone
-		export fmtventi
-		exit
-	}
-	if(! test -e /bin/venti/fmtarenas || ! test -e /bin/venti/fmtisect || ! test -e /bin/venti/fmtindex){
-		bind -a /n/dist/386/bin/venti /bin/venti
-		if(! test -e /bin/venti/fmtarenas || ! test -e /bin/venti/fmtisect || ! test -e /bin/venti/fmtindex){
-			fmtventi=notdone
-			export fmtventi
-			exit
-		}
-	}
-	ff=`{ls /dev/sd*/arenas* /dev/fs/arenas* >[2]/dev/null}
-	if(~ $#ff 0){
-		fmtventi=notdone
-		export fmtventi
-		exit
-	}
-	gg=()
-	for(f in $ff)
-		if(isventi $f)
-			gg=($gg $f)
-	if(~ $#gg 0){
-		fmtventi=ready
-		export fmtventi
-		exit
-	}
-
-	ventiarena=$gg(1)
-	export ventiarena
-
-	fmtventi=done
-	export fmtventi
-	exit
-
-case go
-	ff=`{ls /dev/sd*/arenas* /dev/fs/arenas* >[2]/dev/null}
-	if(~ $#ff 0){
-		echo 'You need to create a partition or partitions to hold the Venti arenas.'
-		echo 'The arena partition names must begin with "arenas".'
-		echo
-		fmtventi=notdone
-		export fmtventi
-		exit
-	}
-	default=(-d $"ff)
-	if(! ~ $#ventiarena 0){
-		default=(-d $"ventiarena)
-	}
-	echo You have the following Venti arena partitions.
-	ls -l $ff
-	echo
-
-	prompt $default 'Venti arena partitions to use'
-	aa=`{echo $rd}
-	bad=no
-	for(a in $aa){
-		if(! ~ $a $ff){
-			echo 'Bad venti arena partition' $a
-			fmtventi=notdone
-			export fmtventi
-			exit
-		}
-	}
-	ventiarena=$aa
-	export ventiarena
-
-	gg=`{ls /dev/sd*/isect* /dev/fs/isect* >[2]/dev/null}
-	if(~ $#gg 0){
-		echo 'You need to create a partition or partitions to hold the Venti indices.'
-		echo 'The index partition names must begin with "isect".'
-		echo
-		fmtventi=notdone
-		export fmtventi
-		exit
-	}
-	default=(-d $"gg)
-	if(! ~ $#ventiindex 0){
-		default=(-d $"ventiindex)
-	}
-
-	echo You have the following Venti index partitions.
-	ls -l $gg
-	echo
-
-	prompt $default 'Venti index partitions to use'
-	aa=`{echo $rd}
-	bad=no
-	for(a in $aa){
-		if(! ~ $a $gg){
-			echo 'Bad venti index partition' $a
-			fmtventi=notdone
-			export fmtventi
-			exit
-		}
-	}
-	ventiindex=$aa
-	export ventiindex
-
-	n=-1
-	fmta=()
-	for(a in $ventiarena){
-		do=yes
-		n=`{hoc -e 1+$n}
-		if(isventiarenas $a){
-			echo File $a is already formatted as a Venti arenas partition.
-			prompt -d no 'Reformat '$a yes no
-			do=$rd
-		}
-		if(~ $do yes)
-			fmta=($fmta arenas$n:$a)
-	}
-
-	n=-1
-	fmti=()
-	for(a in $ventiindex){
-		do=yes
-		n=`{hoc -e 1+$n}
-		if(isventiisect $a){
-			echo File $a is already formatted as a Venti index section.
-			prompt -d no 'Reformat '$a yes no
-			do=$rd
-		}
-		if(~ $do yes)
-			fmti=($fmti isect$n:$a)
-	}
-
-	echo Formatting Venti arenas and indices (this takes a while).
-	# do each disk in parallel
-	echo good >/tmp/fmt
-	dd=()
-	for(a in $fmta $fmti){
-		d=`{echo $a | sed 's!.*:(/.*/).*!\1!'}
-		if(! ~ $d $dd)
-			dd=($dd $d)
-	}
-	for(d in $dd){
-		{
-			for(a in $fmta){
-				i=`{echo $a | sed 's!(.*):(/.*/)(.*)!\1 \2 \2\3!'}
-				if(~ $i(2) $d){
-					echo $i(3) ...
-					venti/fmtarenas $i(1) $i(3) || echo bad >/tmp/fmt
-					echo done with $i(3)
-				}
-			}
-			for(a in $fmti){
-				i=`{echo $a | sed 's!(.*):(/.*/)(.*)!\1 \2 \2\3!'}
-				if(~ $i(2) $d){
-					echo $i(3) ...
-					venti/fmtisect $i(1) $i(3) || echo bad >/tmp/fmt
-					echo done with $i(3)
-				}
-			}
-		} &
-	}
-	wait
-	if(~ bad `{cat /tmp/fmt}){
-		echo There were errors formatting the indices and arenas.
-		fmtventi=ready
-		export fmtventi
-		exit errors
-	}
-
-	echo Done formatting Venti arenas and indices.
-
-	v=$ventiarena(1)
-	echo Storing Venti config on $v...
-	{
-		echo index main
-		for(i in $ventiindex)
-			echo isect $i
-		for(a in $ventiarena)
-			echo arenas $a
-	} | venti/conf -w $v
-
-	echo Initializing index...
-	venti/fmtindex $v
-
-	echo Done with Venti!
-}
-
diff --git a/sys/lib/dist.old/pc/inst/gui b/sys/lib/dist.old/pc/inst/gui
deleted file mode 100755
index afb0981d0..000000000
--- a/sys/lib/dist.old/pc/inst/gui
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/rc
-
-cd /bin/inst
-echo blanktime 0 >/dev/vgactl
-. defs
-
-startwin 640 480
diff --git a/sys/lib/dist.old/pc/inst/halt b/sys/lib/dist.old/pc/inst/halt
deleted file mode 100755
index 4554359f0..000000000
--- a/sys/lib/dist.old/pc/inst/halt
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/rc
-
-echo -n 'Halting file systems...'
-
-if(ps | grep -s ' venti$')
-	venti/sync -h tcp!127.0.0.1!17034
-if(ps | grep -s ' fossil$'){
-	echo fsys all halt >>/srv/fscons
-	slay fossil|rc
-}
-
-echo done
-echo
-echo Remember to take the install disk out of the drive.
-echo Feel free to turn off your computer.
-while()
-	sleep 3600
-
diff --git a/sys/lib/dist.old/pc/inst/hasmbr b/sys/lib/dist.old/pc/inst/hasmbr
deleted file mode 100755
index 1adaa0a5b..000000000
--- a/sys/lib/dist.old/pc/inst/hasmbr
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1) {
-	echo 'usage: hasmbr /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-x=`{xd -b $1 | sed -n '32p;32q'}
-if(~ $x(16) 55 && ~ $x(17) aa) 
-	exit ''
-exit nope
-
diff --git a/sys/lib/dist.old/pc/inst/hdrs b/sys/lib/dist.old/pc/inst/hdrs
deleted file mode 100755
index 0b934999f..000000000
--- a/sys/lib/dist.old/pc/inst/hdrs
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1) {
-	echo 'usage: hdrs file.9gz' >[1=2]
-	exit usage
-}
-gunzip < $1 | disk/mkext -h 
diff --git a/sys/lib/dist.old/pc/inst/is9660 b/sys/lib/dist.old/pc/inst/is9660
deleted file mode 100755
index 1d138e55e..000000000
--- a/sys/lib/dist.old/pc/inst/is9660
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/rc
-
-# 0000000  01  C  D  0  0  1 01 00  P  L  A  N     9
-   
-if(! ~ $#* 1) {
-	echo 'usage: is9660 /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-ifs=$nl {id=`{dd -if $1 -bs 2048 -skip 16>[2]/dev/null | xd -c | sed 1q | sed 's/.........(....................).*/\1/'}}
-~ $id '01  C  D  0  0  1 01'
-exit $status
diff --git a/sys/lib/dist.old/pc/inst/isext2 b/sys/lib/dist.old/pc/inst/isext2
deleted file mode 100755
index b79265f6a..000000000
--- a/sys/lib/dist.old/pc/inst/isext2
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1) {
-	echo 'usage: isext2 /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-cmp -s <{dd -if $1 -bs 1 -count 2 -skip 1080 >[2]/dev/null | xd -b |sed 1q} \
-	<{echo '0000000  53 ef'}
-
-exit $status
diff --git a/sys/lib/dist.old/pc/inst/isfat b/sys/lib/dist.old/pc/inst/isfat
deleted file mode 100755
index 860278571..000000000
--- a/sys/lib/dist.old/pc/inst/isfat
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/rc
-
-rfork e
-
-# 0000000  eb 3c 90  P  l  a  n  9  .  0  0 00 02 04 02 00
-# 0000010  02 00 02 02  P f8 14 00  ? 00 ff 00  ~ 04  } 00
-# 0000020  02  P 00 00 80 00  ) a8 04  } 00  C  Y  L  I  N
-# 0000030   D  R  I  C  A  L  F  A  T  1  6          fa 8c
-
-if(! ~ $#* 1) {
-	echo 'usage: isfat /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-arg=$1
-fn fat {
-	cmp -s <{dd -if $arg -bs 1 -count 3 -skip $1 >[2]/dev/null} <{echo -n FAT}
-}
-
-fat 54 || fat 82
-exit $status
-
diff --git a/sys/lib/dist.old/pc/inst/isfossil b/sys/lib/dist.old/pc/inst/isfossil
deleted file mode 100755
index 21c7d3e29..000000000
--- a/sys/lib/dist.old/pc/inst/isfossil
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1){
-	echo 'usage: isfossil /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-arg=$1
-if(! cmp -s <{dd -quiet 1 -if $arg -bs 1024 -iseek 127 |
-	dd -quiet 1 -bs 14 -count 1} <{echo 'fossil config'})
-	exit noconfig
-if(! cmp -s <{dd -quiet 1 -if $arg -bs 1024 -iseek 128 |
-	dd -quiet 1 -bs 4 -count 1 | xd -b | sed 1q} <{echo '0000000  37 76 ae 89'})
-	exit notwritebuffer
-exit 0
-
diff --git a/sys/lib/dist.old/pc/inst/isventi b/sys/lib/dist.old/pc/inst/isventi
deleted file mode 100755
index 555c27a7f..000000000
--- a/sys/lib/dist.old/pc/inst/isventi
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1){
-	echo 'usage: isventi /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-arg=$1
-if(! cmp -s <{dd -quiet 1 -if $arg -bs 1024 -iseek 248 |
-	dd -quiet 1 -bs 13 -count 1} <{echo 'venti config'})
-	exit noconfig
-exit 0
-
diff --git a/sys/lib/dist.old/pc/inst/isventiarenas b/sys/lib/dist.old/pc/inst/isventiarenas
deleted file mode 100755
index dfce274de..000000000
--- a/sys/lib/dist.old/pc/inst/isventiarenas
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1){
-	echo 'usage: isventiarenas /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-arg=$1
-if(! cmp -s <{dd -quiet 1 -if $arg -bs 1024 -iseek 256 |
-	dd -quiet 1 -bs 4 -count 1 | xd -b | sed 1q} <{echo '0000000  a9 e4 a5 e7'})
-	exit notarenas
-exit 0
-
diff --git a/sys/lib/dist.old/pc/inst/isventiisect b/sys/lib/dist.old/pc/inst/isventiisect
deleted file mode 100755
index 0b11c9c4e..000000000
--- a/sys/lib/dist.old/pc/inst/isventiisect
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/rc
-
-if(! ~ $#* 1){
-	echo 'usage: isventiisect /dev/sdC0/part' >[1=2]
-	exit usage
-}
-
-arg=$1
-if(! cmp -s <{dd -quiet 1 -if $arg -bs 1024 -iseek 256 |
-	dd -quiet 1 -bs 4 -count 1 | xd -b | sed 1q} <{echo '0000000  d1 5c 5e c7'})
-	exit notisect
-exit 0
-
diff --git a/sys/lib/dist.old/pc/inst/main b/sys/lib/dist.old/pc/inst/main
deleted file mode 100755
index 25ac0d168..000000000
--- a/sys/lib/dist.old/pc/inst/main
+++ /dev/null
@@ -1,115 +0,0 @@
-#!/bin/rc
-
-. defs
-
-while()
-{
-div=--------------------------------------
-echo
-echo $div
-echo
-echo -n 'Preparing menu...'
-
-# must be topologically sorted (by prereq)
-tasks=(\
-	configfs\
-	partdisk prepdisk\
-	fmtfossil\
-	mountfs\
-	configdist\
-	confignet\
-	mountdist\
-	fmtventi\
-	download\
-	copydist\
-	bootsetup finish stop\
-	stopether stopppp\
-)
-#	startether startppp stopether stopppp download\
-
-# these don't show up in the menu but still matter
-pseudotasks=(configip havefiles etherup etherdown pppup pppdown)
-
-for(i in $tasks $pseudotasks)
-	$i=notdone
-
-coherence
-
-for(i in $tasks $pseudotasks)
-	if(~ $#$i 0)
-		$i=notdone
-
-#
-# we believe the environment about what is done
-# only if we've confirmed it.  since the tasks list is sorted so that
-# prereqs of xxx come before xxx, it's okay to assume xxx
-# is done until proven otherwise -- either a prereq or checkdone
-# will say so.
-#
-
-done=()
-ready=()
-rm /env/done
-rm /env/ready
-for(i in $tasks) {
-	$i=done
-	for(j in `{prereq $i})
-		if(! ~ $$j done)
-			$i=notdone
-	if(~ $$i done) {
-		export $i
-		$i checkdone
-		$i=`{grep '^'$i^'=' /tmp/vars | sed -n '$p' | sed 's/.*=//'}
-	}
-
-	if(~ $$i notdone ready) {
-		okay=yes
-		for(j in `{prereq $i}) 
-			if(! ~ $$j done)
-				okay=no
-		switch($okay){
-		case yes
-			$i=ready
-			export $i
-			$i checkready
-			$i=`{grep '^'$i^'=' /tmp/vars | sed -n '$p' | sed 's/.*=//'}
-		case no
-			$i=notdone
-		}
-	}
-
-	if(~ $$i done ready)
-		$$i=($$$i $i)		# rc can be just as complicated as perl!
-}
-
-export $tasks $pseudotasks done ready
-coherence
-echo
-
-if(! ~ $#done 0) {
-	echo 'The following tasks are done: '
-	for(i in $done)
-		desc $i
-	echo
-}
-
-echo 'The following unfinished tasks are ready to be done:'
-for(i in $ready)
-	desc $i
-echo
-
-if(~ $#ready 0) {
-	echo hey you finished everything!  not supposed to happen.
-	sleep 100
-	exit
-}
-
-prompt -d $ready(1) -w '' 'Task to do' $done $ready
-
-echo
-echo $div
-
-$rd go
-$rd=done		# if it's not, the check will figure that out
-export $rd
-}
diff --git a/sys/lib/dist.old/pc/inst/mainloop b/sys/lib/dist.old/pc/inst/mainloop
deleted file mode 100755
index 94d58efc4..000000000
--- a/sys/lib/dist.old/pc/inst/mainloop
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/rc
-
-sleep 86400 &
-cd /bin/inst
-. defs
-fn sigint { }
-
-coherence
-
-disks=`{ls /dev/sd*/data >[2]/dev/null | sed 's!/dev/(sd..)/data!\1!'}
-for (i in /dev/sd*/data)
-	if(test -f $i)
-		disk/fdisk -p $i>`{basename -d $i}^/ctl >[2]/dev/null
-for(i in /dev/sd*/plan9*)
-	if(test -f $i)
-		disk/prep -p $i >`{basename -d $i}^/ctl >[2]/dev/null
-
-# we run this while() here so that ctl-d won''t exit from us -- it''ll only exit main!
-# main contains a while() loop too, to avoid the hit of 
-# continually reexecing from here.
-
-while()
-	main
diff --git a/sys/lib/dist.old/pc/inst/mkini.awk b/sys/lib/dist.old/pc/inst/mkini.awk
deleted file mode 100755
index 7ddf6a80f..000000000
--- a/sys/lib/dist.old/pc/inst/mkini.awk
+++ /dev/null
@@ -1,59 +0,0 @@
-BEGIN{
-	m = "common"
-	haveold = 0;
-	while(getline <"/n/9fat/plan9-3e.ini" > 0){
-		haveold = 1
-		if($0 ~ /\[.*\]/){
-			m = substr($0, 2, length($0)-2)
-			continue
-		}
-		if(m=="menu" && $0 ~ /^menuitem=4e,/)
-			continue
-		a[m] = a[m] $0 "\n"
-	}
-
-	a["4e"] = ""
-	while(getline <"/tmp/plan9.ini" > 0)
-		a["4e"] = a["4e"] $0 "\n"
-
-	if(a["menu"] == "" && haveold){
-		a["menu"] = "menuitem=3e, Plan 9 Third Edition\n"
-		a["3e"] = ""
-	}
-
-	if(a["common"] != ""){
-		for(i in a)
-			if(i != "4e" && i != "common" && i != "menu")
-				a[i] = a["common"] a[i]
-		delete a["common"]
-	}
-
-	bootdisk4e=ENVIRON["fs"]
-	gsub("/dev/", "boot(args|disk|file)=local!#S/", bootdisk4e)
-
-	if(!haveold)
-		print a["4e"]
-	else{
-		print "[menu]"
-		print "menuitem=4e, Plan 9 Fourth Edition"
-		print a["menu"]
-		print ""
-		delete a["menu"]
-	
-		print "[4e]"
-		print a["4e"]
-		print ""
-		delete a["4e"]
-	
-		for(i in a){
-			# BUG: if rootdir is already there we should rewrite it 
-			# sometimes into /3e/whatwasthere
-			if(a[i] ~ bootdisk4e && !(a[i] ~ /rootdir=/))
-				a[i] = "rootdir=/root/3e\n" a[i]
-			print "[" i "]"
-			gsub(/9fat!9pcdisk/, "9fat!9pc3e", a[i])
-			print a[i]
-			print ""
-		}
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/mountdist b/sys/lib/dist.old/pc/inst/mountdist
deleted file mode 100755
index 8d171a1cc..000000000
--- a/sys/lib/dist.old/pc/inst/mountdist
+++ /dev/null
@@ -1,222 +0,0 @@
-#!/bin/rc
-
-# prereq: mountfs configdist
-# desc: locate and mount the distribution
-
-fn domount{
-	if(! test -e $mountmedia(2))
-		logprog $srvmedia
-	unmount /n/distmedia >[2]/dev/null
-	logprog $mountmedia
-}
-
-fn exitifdone{
-	if(test -f /n/dist/dist/replica/plan9.db)
-		exit
-}
-
-fn trycdimage{
-	if(test -f $1){
-		rm -f /srv/9660.dist
-		unmount /n/dist
-		9660srv 9660.dist >[2]/dev/null
-		logprog mount /srv/9660.dist /n/dist $1
-		exitifdone
-		mountdist=notdone
-		export mountdist
-		exit notdone
-	}
-}
-
-fn trycdimagebz2 {
-	if(test -f $1){
-		echo -n 'bunzip2 < '^$1^' >/n/newfs/dist/plan9.iso'
-		bunzip2 < $1 >/n/newfs/dist/_plan9.iso &&
-		mv /n/newfs/dist/_plan9.iso /n/newfs/dist/plan9.iso
-		echo
-		trycdimage /n/newfs/dist/plan9.iso
-		mountdist=notdone
-		export mountdist
-		exit notdone
-	}
-}
-
-fn havedist {
-	test -f $1/dist/replica/plan9.db ||
-	test -f $1/plan9.iso ||
-	test -f $1/plan9.iso.bz2
-}
-
-switch($1){
-case checkready
-	if(! ~ $distisfrom local && ! ~ $download done){
-		mountdist=notdone
-		export mountdist
-	}
-	if(! ~ $#mountmedia 0 1){
-		if(domount){
-			mountdist=done
-			export mountdist
-			if(mountdist checkdone)
-				exit
-		}
-		srvmedia=()
-		mountmedia=()
-		mountdist=ready
-		export srvmedia mountmedia mountdist
-	}
-		
-case go
-	fat=()
-	ext2=()
-	x9660=()
-	fossil=()
-
-	echo Please wait... Scanning storage devices...
-
-	parts=`{ls /dev/sd??/* >[2]/dev/null | grep -v '/(plan9.*|ctl|log|raw)$'}
-	for (i in $parts) {
-		echo -n '	'^$i
-		n=`{echo $i | sed 's;/;_;g'}
-		if(! test -f /tmp/localpart.$n)
-			dd -if $i -bs 2048 -count 32 -of /tmp/localpart.$n >[2]/dev/null
-		if(isfat /tmp/localpart.$n)
-			fat=($fat $i)
-		if(isext2 /tmp/localpart.$n)
-			ext2=($ext2 $i)
-		if(is9660 /tmp/localpart.$n)
-			x9660=($x9660 $i)
-		if(isfossil $i)
-			fossil=($fossil $i)
-		echo
-	}
-	echo
-	echo The following storage media were detected.
-	echo Choose the one containing the distribution.
-	echo
-	for(i in $parts){
-		switch($i){
-		case $fat
-			echo 	'	'^$i^' (microsoft fat)'
-		case $ext2
-			echo 	'	'^$i^' (linux ext2)'
-		case $x9660
-			echo 	'	'^$i^' (iso9660 cdrom)'
-		case $fossil
-			echo 	'	'^$i^' (plan9 fossil)'
-		}
-	}
-	echo
-
-	mountstatus=x
-	while(! ~ $mountstatus ''){
-		prompt -w '' 'Distribution disk' $fat $x9660 $fossil
-		disk=$rd
-
-		srvmedia=()
-		mountmedia=()
-		switch($disk){
-		case $fs
-			mountmedia=(bind /n/newfs /n/distmedia)
-		case $fat
-			srvmedia=(dossrv)
-			mountmedia=(mount /srv/dos /n/distmedia $disk)
-		case $ext2
-			srvmedia=(ext2srv -r)
-			mountmedia=(mount /srv/ext2 /n/distmedia $disk)
-		case $x9660
-			srvmedia=(9660srv)
-			mountmedia=(mount /srv/9660 /n/distmedia $disk)
-		case $fossil
-			echo 'srv fossil.mountdist' > /tmp/fossi.conf
-			echo 'fsys main config '^$disk >> /tmp/fossil.conf
-			echo 'fsys main open -AWVP' >> /tmp/fossil.conf
-			echo 'fsys main' >> /tmp/fossil.conf
-			srvmedia=(fossil/fossil -c '. /tmp/fossil.conf')
-			mountmedia=(mount /srv/fossil.mountdist /n/distmedia)
-		case *
-			echo Unknown disk type '(cannot happen)'
-			exit oops
-		}
-		export srvmedia mountmedia
-		domount
-		mountstatus=$status
-	}
-
-	first=yes
-	dir=/
-	while(~ $first yes || ! havedist /n/distmedia/$dir){
-		if(~ $first yes){
-			echo
-			echo Which directory contains the distribution?
-			echo 'Any of the following will suffice (in order of preference):'
-			echo '	- the root directory of the cd image'
-			echo '	- the directory containing plan9.iso'
-			echo '	- the directory containing plan9.iso.bz2'
-			echo 'Typing `browse'' will put you in a shell that you can use to'
-			echo 'look for the directory.'
-			echo
-			first=no
-		}
-
-		prompt -d browse 'Location of archives'
-		dir=$rd
-		if(~ $dir browse){
-			echo This is a simple shell.  Commands are:
-			echo '	cd directory	- change to directory'
-			echo '	lc				- list contents of current directory'
-			echo '	exit			- exit shell'
-			echo 
-			echo 'Move to the directory containing the distribution'
-			echo 'and then exit.'
-			echo
-			oifs=$ifs
-			ifs=$nl
-			dir=`{cdsh -r /n/distmedia}
-			ifs=$oifs
-		}
-		if(~ $#dir 0)
-			dir=safdsfdsfdsf
-		if(! ~ $#dir 1)
-			dir=$"dir
-		if(! havedist /n/distmedia/$dir)
-			echo 'No distribution found in '^`{cleanname /$dir}
-	}
-
-	distmediadir=$dir
-	export distmediadir
-
-case checkdone
-	if(! ~ $#distmediadir 1){
-		mountdist=notdone
-		export mountdist
-		exit notdone
-	}
-	if(! havedist /n/distmedia/$distmediadir && ! havedist /n/newfs/dist){
-		mountdist=notdone
-		export mountdist
-		exit notdone
-	}
-
-	exitifdone
-
-	if(test -f /n/distmedia/$distmediadir/dist/replica/plan9.db){
-		bind /n/distmedia/$distmediadir /n/dist
-		bind -a /n/dist/386/bin /bin
-		bind -a /n/dist/rc/bin /bin
-		exitifdone
-		mountdist=notdone
-		export mountdist
-		exit notdone
-	}
-
-	trycdimage /n/distmedia/$distmediadir/plan9.iso
-	trycdimage /n/newfs/dist/plan9.iso
-
-	trycdimagebz2 /n/distmedia/$distmediadir/plan9.iso.bz2
-	trycdimagebz2 /n/newfs/dist/plan9.iso.bz2
-
-	mountdist=notdone
-	export mountdist
-	exit notdone
-}
diff --git a/sys/lib/dist.old/pc/inst/mountfossil b/sys/lib/dist.old/pc/inst/mountfossil
deleted file mode 100755
index e98a3f48c..000000000
--- a/sys/lib/dist.old/pc/inst/mountfossil
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/rc
-
-switch($1){
-case checkready checkdone
-	if(! ~ $fmtfossil done){
-		mountfs=notdone
-		export mountfs
-		exit
-	}
-	if(! test -f /dev/sd*/fossil* && ! test -f /dev/fs/fossil*){
-		mountfs=notdone
-		export mountfs
-		exit
-	}
-	if(! ~ $#fossil 1 || ! test -f $fossil){
-		mountfs=ready
-		export mountfs
-		exit
-	}
-	if(! ps | grep -s ' fossil$'){
-		echo 'srv -p fscons' > /env/fossilconf
-		echo 'srv -AP fossil' >> /env/fossilconf
-		fossil/conf $fossil | sed 's/^fsys main open .*/& -AWVP/' |
-			sed 's/^fsys main snaptime .*//' >> /env/fossilconf
-		if(! logprog fossil/fossil -c .' /env/fossilconf'>>[2]/srv/log){
-			echo 'fossil: '^$status
-			mountfs=ready
-			export mountfs
-			exit oops
-		}
-		if(! test -f /srv/fossil){
-			echo 'fossil did not create /srv/fossil'
-			mountfs=ready
-			exit oops
-		}
-		cat /srv/fscons >>/srv/log &
-		if(! logprog mount -c /srv/fossil /n/newfs){
-			echo 'mount: '^$status
-			mountfs=ready
-			export mountfs
-			exit oops
-		}
-		fs=$fossil
-		export fs
-	}
-	if(! test -s /n/newfs/adm/users){
-		echo fsys main create /active/adm adm sys d775 >>/srv/fscons
-		echo fsys main create /active/adm/users adm sys 664 >>/srv/fscons
-		echo uname upas :upas >>/srv/fscons
-		echo users -w >>/srv/fscons
-		sleep 2
-	}
-	if(! test -s /n/newfs/adm/users){
-		echo 'could not create /adm/users'
-		mountfs=ready
-		export mountfs
-		exit oops
-	}
-	for(i in dist dist/replica dist/replica/client){
-		if(! test -d /n/newfs/$i)
-			echo fsys main create /active/$i sys sys d775 >>/srv/fscons
-		sleep 2
-	}
-	if(! test -d /n/newfs/dist/replica/client){
-		echo 'could not create /dist/replica/client'
-		mountfs=ready
-		export mountfs
-		exit oops
-	}
-	if(! test -e /n/newfs/dist/replica/client/plan9.db){
-		echo fsys main create /active/dist/replica/client/plan9.db sys sys 664 >>/srv/fscons
-		echo fsys main create /active/dist/replica/client/plan9.log sys sys a664 >>/srv/fscons
-	}
-	if(test -d /n/newfs/dist/replica/client && test -f /n/newfs/adm/users){
-		mountfs=done
-		export mountfs
-		exit
-	}
-	mountfs=ready
-	export mountfs
-	exit
-
-case go
-	echo 'The following partitions named fossil* were found.'
-	echo
-	echo 'Please choose one to use as the installation file system'
-	echo 'for your Plan 9 installation.'
-	echo
-	files=(`{ls /dev/sd*/fossil* /dev/fs/fossil* >[2]/dev/null})
-	ls -l $files
-	echo
-	if(~ $#fossil 1 && ~ $fossil $files)
-		default=(-d $fossil)
-	if not if(~ $#files 1)
-		default=(-d $files)
-	if not
-		default=()
-	prompt $default 'Fossil partition' $files
-	slay fossil|rc
-	fossil=$rd
-	export fossil
-}
-
-
diff --git a/sys/lib/dist.old/pc/inst/mountfs b/sys/lib/dist.old/pc/inst/mountfs
deleted file mode 100755
index 8aa9b16ff..000000000
--- a/sys/lib/dist.old/pc/inst/mountfs
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/rc
-
-# desc: choose and mount file system partition
-# prereq: configfs
-
-switch($fstype){
-case fossil fossil+venti
-	exec mountfossil $*
-case *
-	mountfs=notdone
-	export mountfs
-	exit
-}
-
diff --git a/sys/lib/dist.old/pc/inst/moveoldfs b/sys/lib/dist.old/pc/inst/moveoldfs
deleted file mode 100755
index 819beeb39..000000000
--- a/sys/lib/dist.old/pc/inst/moveoldfs
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/rc
-
-# desc: move an old third edition plan 9 file system out of the way
-# prereq: mountfs
-
-rootfiles=(\
-	386\
-	68000\
-	68020\
-	LICENSE\
-	NOTICE\
-	acme\
-	adm\
-	alpha\
-	arm\
-	cron\
-	dist\
-	fd\
-	lib\
-	lp\
-	mail\
-	mips\
-	mnt\
-	n\
-	power\
-	rc\
-	sparc\
-	sys\
-	tmp\
-	usr/glenda\
-	wrap\
-)
-
-switch($1){
-case checkready
-	if(! test -d /n/kfs/wrap){
-		moveoldfs=done
-		export moveoldfs
-	}
-
-case go
-	if(test -d /n/kfs/wrap){
-		echo 'You have a Third Edition Plan 9 installation on '^$fs^'.'
-		echo 'We need to move the old file system out of the way (into /3e)'
-		echo 'in order to continue.'
-		echo
-		prompt 'Move old file system' y n
-		switch($rd){
-		case y
-			kname=`{kfsname $fs}
-			log Moving old Plan 9 installation into /3e on kfs
-			logprog disk/kfscmd -n$kname 'create /3e sys sys 555 d' >>[2]/srv/log
-			logprog disk/kfscmd -n$kname 'create /3e/usr sys sys 555 d' >>[2]/srv/log
-			for(i in $rootfiles)
-				if(test -e /n/kfs/$i)
-					logprog disk/kfscmd -n$kname 'rename /'^$i^' /3e/'^$i
-			# copy extant /adm/users in case there have been modifications
-			logprog disk/kfscmd -n$kname 'create /adm adm adm 555 d' >>[2]/srv/log
-			logprog cp /n/kfs/3e/adm/users /n/kfs/adm/users >>[2]/srv/log
-
-		case n
-			echo 'Okay, but we can''t continue.'
-			echo
-		}
-	}
-
-case checkdone
-	if(test -d /n/kfs/wrap){
-		moveoldfs=notdone
-		export moveoldfs
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/partdisk b/sys/lib/dist.old/pc/inst/partdisk
deleted file mode 100755
index 430d45f3f..000000000
--- a/sys/lib/dist.old/pc/inst/partdisk
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/rc
-
-# desc: edit partition tables (e.g., to create a plan 9 partition)
-# prereq: configfs
-
-switch($1){
-case go
-	disks=`{ls /dev/sd*/data >[2]/dev/null | sed 's!/dev/(sd..)/data!\1!'}
-	if(~ $#disks 0) {
-		echo 'No disk devices were found on your system.'
-		echo 'The installation process cannot continue.'
-		exit giveup
-	}
-	
-	echo 'The following disk devices were found.'
-	echo
-	for(i in $disks) {
-		desc=`{cat /dev/$i/ctl | sed 1q | sed 's/inquiry //'}
-		echo $i '-' $desc
-		echo e | disk/fdisk -r /dev/$i/data >[2]/dev/null | grep -v '^   mbr'
-		echo
-	}
-	
-	okay=no
-	defdisk=$disks(1)
-
-	if(~ $#disks 1)
-		default=(-d $disks)
-	if not
-		default=()
-	prompt $default 'Disk to partition' $disks
-	disk=$rd
-
-	if(! hasmbr /dev/$disk/data) {
-		echo 'The disk you selected HAS NO master boot record on its first sector.'
-		echo '(Perhaps it is a completely blank disk.)'
-		echo 'You need a master boot record to use the disk.'
-		echo 'Should we install a default master boot record?'
-		echo
-		prompt 'Install mbr' y n
-		switch($rd) {
-		case y
-			disk/mbr -m /386/mbr /dev/$disk/data
-			pickdisk=done
-		}
-	}
-	echo
-	echo 'This is disk/fdisk; use it to create a Plan 9 partition.'
-	echo 'If there is enough room, a Plan 9 partition will be'
-	echo 'suggested; you can probably just type ''w'' and then ''q''.'
-	echo
-	disk/fdisk -a /dev/$disk/data
-	disk/fdisk -p /dev/$disk/data >/dev/$disk/ctl >[2]/dev/null
-	for(i in /dev/sd*/plan9*){
-		if(test -f $i){
-			d=`{basename -d $i}
-			disk/prep -p $i >$d/ctl >[2]/dev/null
-		}
-	}
-
-case checkdone
-	# we want at least one disk with both an mbr and a plan9 partition
-	mbrandplan9=0
-	disks=`{ls /dev/sd*/plan9 >[2]/dev/null | sed 's!/dev/(sd..)/plan9!\1!'}
-	for(disk in $disks) {
-		if(hasmbr /dev/$disk/data)
-			mbrandplan9=1
-	}
-	if(~ $mbrandplan9 0){
-		partdisk=notdone
-		export partdisk
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/prepdisk b/sys/lib/dist.old/pc/inst/prepdisk
deleted file mode 100755
index 6ef4a92f8..000000000
--- a/sys/lib/dist.old/pc/inst/prepdisk
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/rc
-
-# desc: subdivide plan 9 disk partition
-# prereq: partdisk
-
-fn autotype {
-	if(~ $fstype fossil)
-		echo -a 9fat -a nvram -a fossil -a swap
-	if(~ $fstype fossil+venti)
-		echo -a 9fat -a nvram -a arenas -a isect -a fossil -a swap # -a other
-}
-
-switch($1) {
-case checkready
-	if(! test -f /dev/sd*/plan9*){
-		prepdisk=notdone
-		export prepdisk
-	}
-
-case go
-	echo 'The following Plan 9 disk partitions were found.'
-	echo
-	disks=(/dev/sd*/plan9*)
-	for (i in $disks){
-		echo $i
-		echo q | disk/prep -r $i >[2]/dev/null
-		echo
-	}
-	if(~ $#disks 1)
-		default=(-d $disks)
-	if not
-		default=()
-	prompt $default 'Plan 9 partition to subdivide' $disks
-	disk=$rd
-
-	echo 'This is disk/prep; use it to subdivide the Plan 9 partition.'
-	echo 'If it is not yet subdivided, a sensible layout will be suggested;'
-	echo 'you can probably just type ''w'' and then ''q''.'
-	echo
-	disk/prep `{autotype} $disk
-	disk/prep -p $disk >`{basename -d $disk}^/ctl >[2]/dev/null
-
-case checkdone
-	if(! test -f /dev/sd*/9fat)
-		prepdisk=ready
-
-	if(! ~ $prepdisk ready){
-		prepdisk=done
-		switch($fstype){
-		case fossil
-			if(! test -f /dev/sd*/fossil* && ! test -f /dev/fs/fossil*)
-				prepdisk=ready
-		case fossil+venti
-			if(! test -f /dev/sd*/fossil* && ! test -f /dev/fs/fossil*)
-				prepdisk=ready
-			if(! test -f /dev/sd*/arenas && ! test -f /dev/fs/arenas*)
-				prepdisk=ready
-			if(! test -f /dev/sd*/isect && ! test -f /dev/fs/isect*)
-				prepdisk=ready
-		}
-	}
-	export prepdisk
-}
diff --git a/sys/lib/dist.old/pc/inst/replcfg b/sys/lib/dist.old/pc/inst/replcfg
deleted file mode 100755
index 30aed8607..000000000
--- a/sys/lib/dist.old/pc/inst/replcfg
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/rc
-
-s=/n/dist/dist/replica
-serverroot=/n/dist
-serverlog=$s/plan9.log
-serverproto=$s/plan9.proto
-fn servermount { status='' } 
-fn serverupdate { status='' }
-
-fn clientmount { status='' }
-c=/n/newfs/dist/replica
-clientroot=/n/newfs
-clientproto=$c/plan9.proto
-clientdb=$c/client/plan9.db
-clientexclude=(dist/replica/client)
-clientlog=$c/client/plan9.log
-
-applyopt=(-t -u -T$c/client/plan9.time)
diff --git a/sys/lib/dist.old/pc/inst/startether b/sys/lib/dist.old/pc/inst/startether
deleted file mode 100755
index 077504c1a..000000000
--- a/sys/lib/dist.old/pc/inst/startether
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/rc
-
-# desc: activate ethernet card
-# prereq: configether
-
-switch($1) {
-case checkready
-	if(isipdevup /net/ether0) {
-		startether=done
-		export startether
-	}
-
-case go
-	if(isipdevup /net/ether0)
-		exit
-
-	log starting ethernet $ethermethod config
-	switch($ethermethod) {
-	case manual
-		ip/ipconfig -g $gwaddr ether /net/ether0 $ipaddr $ipmask >>[2]/srv/log
-	case dhcp
-		ip/ipconfig $dhcphost -D >>/srv/log >[2=1]
-	}
-
-case checkdone
-	if(! isipdevup /net/ether0) {
-		startether=notdone
-		export startether
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/startppp b/sys/lib/dist.old/pc/inst/startppp
deleted file mode 100755
index 02bc090ef..000000000
--- a/sys/lib/dist.old/pc/inst/startppp
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/rc
-
-# desc: activate ppp connection
-# prereq: configppp
-
-switch($1) {
-case checkready checkdone
-	if (isipdevup '^pkt[0-9]')
-		startppp=done
-	export startppp
-
-case go
-	if(isipdevup '^pkt[0-9]')
-		exit
-
-	ctl=$pppdev^ctl
-	echo b115200 >$ctl
-
-	switch($pppmethod) {
-	case manual
-		echo 
-		echo 'Please dial the modem, and type ctl-d when PPP has started.'
-		echo 'You may need to type ctl-m to send modem commands.'
-		echo
-		ip/ppp -f -u -b b^$pppbaud -p /dev/^$pppdev
-
-	case auto
-		ip/ppp -f -b b^$pppbaud -p /dev/^$pppdev -s $"pppuser:$"ppppasswd -t 'atdt'^$"pppphone
-	}
-}
diff --git a/sys/lib/dist.old/pc/inst/startwin b/sys/lib/dist.old/pc/inst/startwin
deleted file mode 100755
index bcd542890..000000000
--- a/sys/lib/dist.old/pc/inst/startwin
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/rc
-
-fn time { date | sed 's/.........$//'}
-
-rm -f /srv/log
-
-if(~ $#* 2) {
-	wid=$1
-	ht=$2
-} 
-if not {
-	scr=(`{cat /dev/draw/new >[2]/dev/null || status=''})
-	wid=$scr(7)
-	ht=$scr(8)
-}
-
-if(test $ht -gt 800)
-	ht=800
-
-if(test $wid -gt 800)
-	wid=800
-
-statwid=`{hoc -e $wid^'*.2'}
-if(test $statwid -lt 180)
-	statwid=180
-if(test $statwid -gt 300)
-	statwid=300
-
-logwid=`{hoc -e $wid^-$statwid}
-if(test $logwid -gt 1000)
-	logwid=1000
-
-loght=`{hoc -e $ht^'*.25'}
-if(test $loght -lt 130)
-	loght=130
-
-textht=`{hoc -e $ht^-$loght}
-
-window 0,$textht,$statwid,$ht stats -lmisce
-window $statwid,$textht,^`{hoc -e $logwid+$statwid}^,$ht tailfsrv
-window 0,0,^`{hoc -e $logwid+$statwid}^,$textht inst/mainloop
-
-while(! test -f /srv/log)
-	sleep 1
-
-log `{time} Installation process started
diff --git a/sys/lib/dist.old/pc/inst/stop b/sys/lib/dist.old/pc/inst/stop
deleted file mode 100755
index a1d48694f..000000000
--- a/sys/lib/dist.old/pc/inst/stop
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/rc
-
-# desc: save the current installation state, to be resumed later
-# prereq: 
-# mustdo: 
-
-switch($1) {
-case checkdone
-	stop=notdone
-	export stop
-
-case checkready
-	if(~ $cdboot yes){
-		stop=notdone
-		export stop
-	}
-
-case go
-	coherence
-	switch($2){
-	case finished
-		echo 'We need to write the state of the current installation to the install floppy,'
-		echo 'so that you can pick up from here if, for example, you want to set up'
-		echo 'more boot methods.'
-		echo
-	case *
-		echo 'We need to write the state of the current installation to the install floppy.'
-		echo 'so that you can pick up from here when you wish to continue.'
-		echo
-	}
-	echo -n 'Please make sure the install floppy is in the floppy drive and press enter.'
-	read >/dev/null >[2]/dev/null
-
-	if(! a:) {
-		echo 'Couldn''t mount the floppy disk; sorry.'
-		exit
-	}
-
-	if(cp /tmp/vars /n/a:/9inst.cnf || cp /tmp/vars /n/a:/9inst.cnf) {
-		echo 'Your install state has been saved to the install floppy.'
-		if(~ $2 finished){
-			echo
-			echo 'Congratulations; you''ve completed the install.'
-		}
-		echo
-		halt
-	}
-
-	echo 'Couldn''t save the state to your install floppy.  Sorry.'
-}
diff --git a/sys/lib/dist.old/pc/inst/stopether b/sys/lib/dist.old/pc/inst/stopether
deleted file mode 100755
index 59063f0e0..000000000
--- a/sys/lib/dist.old/pc/inst/stopether
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/rc
-
-# desc: shut down the ethernet connection
-# prereq:
-
-
-switch($1) {
-case checkready
-	if(! isipdevup /net/ether0) {
-		stopether=notdone
-		export stopether
-	}
-
-case go
-	ip/ipconfig ether /net/ether0 unbind
-
-case checkdone
-	stopether=notdone
-	export stopether
-}
diff --git a/sys/lib/dist.old/pc/inst/stopppp b/sys/lib/dist.old/pc/inst/stopppp
deleted file mode 100755
index 70b9ce1fe..000000000
--- a/sys/lib/dist.old/pc/inst/stopppp
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/rc
-
-# desc: shut down the ppp connection
-# prereq:
-
-switch($1) {
-case checkready
-	if(! ~ $#pppdev 1 || ! isipdevup '^pkt[0-9]') {
-		stopppp=notdone
-		export stopppp
-	}
-
-case go
-	kill ppp | rc
-
-case checkdone
-	stopppp=notdone
-	export stopppp
-}
diff --git a/sys/lib/dist.old/pc/inst/textonly b/sys/lib/dist.old/pc/inst/textonly
deleted file mode 100755
index 1c3922ce4..000000000
--- a/sys/lib/dist.old/pc/inst/textonly
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/rc
-
-# text-only install
-cd /bin/inst
-. defs
-
-textinst=1
-export textinst
-
-tailfsrv &
-while(! test -f /srv/log)
-	sleep 1
-log `{date} Installation process started
-inst/mainloop
-
diff --git a/sys/lib/dist.old/pc/inst/watchfd b/sys/lib/dist.old/pc/inst/watchfd
deleted file mode 100755
index ca37294e3..000000000
--- a/sys/lib/dist.old/pc/inst/watchfd
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/rc
-
-p=`{ps | grep $1 | sed 's/[^ ]* +([^ ]+) .*/\1/' }
-while(! ~ $#p 1) {
-	sleep 1
-	p=`{ps | grep $1 | sed 's/[^ ]* +([^ ]+) .*/\1/'}
-}
-p=$p(1)
-
-baropt='-w 145,129,445,168'
-if(~ $textinst 1)
-	baropt=-t
-
-{
-	while(test -f /proc/$p/fd)
-		grep '^ *'^$2^' ' /proc/$p/fd >[2]/dev/null
-} | awk '{print $9 " '^$3^'"; fflush("/dev/stdout")}' | bargraph $baropt $4
diff --git a/sys/lib/dist.old/pc/inst/xxx b/sys/lib/dist.old/pc/inst/xxx
deleted file mode 100755
index 56b4eb23a..000000000
--- a/sys/lib/dist.old/pc/inst/xxx
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/rc
-
-ip/ipconfig
-echo '	auth=204.178.31.3
-	authdom=cs.bell-labs.com' >>/net/ndb
-ndb/cs
-auth/factotum
-bind -a /bin/auth /
-cpu -e clear -h tcp!204.178.31.2