Import sources from 2011-03-30 iso image

1 files changed, 213 insertions, 0 deletions

diff --git a/sys/src/boot/bitsy/mem.h b/sys/src/boot/bitsy/mem.h
new file mode 100755
index 000000000..2be6e705c
--- /dev/null
+++ b/sys/src/boot/bitsy/mem.h
@@ -0,0 +1,213 @@
+/*
+ * Memory and machine-specific definitions.  Used in C and assembler.
+ */
+
+/*
+ * Sizes
+ */
+#define	BI2BY		8			/* bits per byte */
+#define BI2WD		32			/* bits per word */
+#define	BY2WD		4			/* bytes per word */
+#define	BY2V		8			/* bytes per double word */
+#define	BY2PG		4096			/* bytes per page */
+#define	WD2PG		(BY2PG/BY2WD)		/* words per page */
+#define	PGSHIFT		12			/* log(BY2PG) */
+#define ROUND(s, sz)	(((s)+(sz-1))&~(sz-1))
+#define PGROUND(s)	ROUND(s, BY2PG)
+#define	BLOCKALIGN	8
+
+#define	MAXMACH		1			/* max # cpus system can run */
+
+/*
+ * Time
+ */
+#define	HZ		(20)				/* clock frequency */
+#define	MS2HZ		(1000/HZ)			/* millisec per clock tick */
+#define	TK2SEC(t)	((t)/HZ)			/* ticks to seconds */
+#define	TK2MS(t)	((((ulong)(t))*1000)/HZ)	/* ticks to milliseconds */
+#define	MS2TK(t)	((((ulong)(t))*HZ)/1000)	/* milliseconds to ticks */
+
+/*
+ *  Virtual addresses:
+ *
+ *  We direct map all discovered DRAM and the area twixt 0xe0000000 and
+ *  0xe8000000 used to provide zeros for cache flushing.
+ *
+ *  Flash is mapped to 0xb0000000 and special registers are mapped
+ *  on demand to areas starting at 0xa0000000.
+ *
+ *  The direct mapping is convenient but not necessary.  It means
+ *  that we don't have to turn on the MMU till well into the
+ *  kernel.  This can be changed by providing a mapping in l.s
+ *  before calling main.
+ */
+#define	UZERO		0			/* base of user address space */
+#define	UTZERO		(UZERO+BY2PG)		/* first address in user text */
+#define	KZERO		0xC0000000		/* base of kernel address space */
+#define	KTZERO		0xC0008000		/* first address in kernel text */
+#define	EMEMZERO	0x90000000		/* 256 meg for add on memory */
+#define	EMEMTOP		0xA0000000		/* ... */
+#define	REGZERO		0xA0000000		/* 128 meg for mapspecial regs */
+#define	REGTOP		0xA8000000		/* ... */
+#define	FLASHZERO	0xB0000000		/* 128 meg for flash */
+#define	FLASHTOP	0xB8000000		/* ... */
+#define	DRAMZERO	0xC0000000		/* 128 meg for dram */
+#define DRAMTOP		0xC8000000		/* ... */
+#define	UCDRAMZERO	0xC8000000		/* 128 meg for dram (uncached/unbuffered) */
+#define UCDRAMTOP	0xD0000000		/* ... */
+#define	NULLZERO	0xE0000000		/* 128 meg for cache flush zeroes */
+#define NULLTOP		0xE8000000		/* ... */
+#define	USTKTOP		0x2000000		/* byte just beyond user stack */
+#define	USTKSIZE	(8*1024*1024)		/* size of user stack */
+#define	TSTKTOP		(USTKTOP-USTKSIZE)	/* end of new stack in sysexec */
+#define TSTKSIZ 	100
+#define MACHADDR	(KZERO+0x00001000)
+#define	EVECTORS	0xFFFF0000		/* virt base of exception vectors */
+
+#define KSTACK		(16*1024)		/* Size of kernel stack */
+
+/*
+ *  Offsets into flash
+ */
+#define Flash_bootldr	(FLASHZERO+0x0)		/* boot loader */
+#define Flash_kernel	(FLASHZERO+0x10000)	/* boot kernel */
+#define	Flash_tar	(FLASHZERO+0x100000)	/* tar file containing fs.sac */
+
+/*
+ *  virtual MMU
+ */
+#define PTEMAPMEM	(1024*1024)	
+#define	PTEPERTAB	(PTEMAPMEM/BY2PG)
+#define SEGMAPSIZE	1984
+#define SSEGMAPSIZE	16
+#define PPN(x)		((x)&~(BY2PG-1))
+
+/*
+ *  SA1110 definitions
+ */
+
+/*
+ *  memory physical addresses
+ */
+#define PHYSFLASH0	0x00000000
+#define PHYSDRAM0	0xC0000000
+#define	PHYSNULL0	0xE0000000
+
+/*
+ *  peripheral control module physical addresses
+ */
+#define USBREGS		0x80000000	/* serial port 0 - USB */
+#define UART1REGS	0x80010000	/* serial port 1 - UART */
+#define GPCLKREGS	0x80020060	/* serial port 1 - general purpose clock */
+#define UART2REGS	0x80030000	/* serial port 2 - low speed IR */
+#define HSSPREGS	0x80040060	/* serial port 2 - high speed IR */
+#define UART3REGS	0x80050000	/* serial port 3 - RS232 UART */
+#define MCPREGS		0x80060000	/* serial port 4 - multimedia comm port */
+#define SSPREGS		0x80070060	/* serial port 4 - synchronous serial port */
+#define OSTIMERREGS	0x90000000	/* operating system timer registers */
+#define POWERREGS	0x90020000	/* power management */
+#define GPIOREGS	0x90040000	/* 28 general purpose IO pins */
+#define INTRREGS	0x90050000	/* interrupt registers */
+#define PPCREGS		0x90060000	/* peripheral pin controller */
+#define MEMCONFREGS	0xA0000000	/* memory configuration */
+#define LCDREGS		0xB0100000	/* display */
+
+/*
+ *  PCMCIA addresses
+ */
+#define PHYSPCM0REGS	0x20000000
+#define PYHSPCM0ATTR	0x28000000
+#define PYHSPCM0MEM	0x2C000000
+#define PHYSPCM1REGS	0x30000000
+#define PYHSPCM1ATTR	0x38000000
+#define PYHSPCM1MEM	0x3C000000
+
+/*
+ *  Program Status Registers
+ */
+#define PsrMusr		0x00000010	/* mode */
+#define PsrMfiq		0x00000011
+#define PsrMirq		0x00000012
+#define PsrMsvc		0x00000013
+#define PsrMabt		0x00000017
+#define PsrMund		0x0000001B
+#define PsrMask		0x0000001F
+
+#define PsrDfiq		0x00000040	/* disable FIQ interrupts */
+#define PsrDirq		0x00000080	/* disable IRQ interrupts */
+
+#define PsrV		0x10000000	/* overflow */
+#define PsrC		0x20000000	/* carry/borrow/extend */
+#define PsrZ		0x40000000	/* zero */
+#define PsrN		0x80000000	/* negative/less than */
+
+/*
+ *  Coprocessors
+ */
+#define CpMMU		15
+#define CpPWR		15
+
+/*
+ *  Internal MMU coprocessor registers
+ */
+#define CpCPUID		0		/* R: */
+#define CpControl	1		/* R: */
+#define CpTTB		2		/* RW: translation table base */
+#define CpDAC		3		/* RW: domain access control */
+#define CpFSR		5		/* RW: fault status */
+#define CpFAR		6		/* RW: fault address */
+#define CpCacheFlush	7		/* W: cache flushing, wb draining*/
+#define CpTLBFlush	8		/* W: TLB flushing */
+#define CpRBFlush	9		/* W: Read Buffer ops */
+#define CpPID		13		/* RW: PID for virtual mapping */
+#define	CpBpt		14		/* W: Breakpoint register */
+#define CpTest		15		/* W: Test, Clock and Idle Control */
+
+/*
+ *  CpControl
+ */
+#define CpCmmuena	0x00000001	/* M: MMU enable */
+#define CpCalign	0x00000002	/* A: alignment fault enable */
+#define CpCdcache	0x00000004	/* C: data cache on */
+#define CpCwb		0x00000008	/* W: write buffer turned on */
+#define CpCi32		0x00000010	/* P: 32-bit program space */
+#define CpCd32		0x00000020	/* D: 32-bit data space */
+#define CpCbe		0x00000080	/* B: big-endian operation */
+#define CpCsystem	0x00000100	/* S: system permission */
+#define CpCrom		0x00000200	/* R: ROM permission */
+#define CpCicache	0x00001000	/* I: instruction cache on */
+#define CpCvivec	0x00002000	/* X: virtual interrupt vector adjust */
+
+/*
+ *  fault codes
+ */
+#define	FCterm		0x2	/* terminal */
+#define	FCvec		0x0	/* vector */
+#define	FCalignf	0x1	/* unaligned full word data access */
+#define	FCalignh	0x3	/* unaligned half word data access */
+#define	FCl1abort	0xc	/* level 1 external abort on translation */
+#define	FCl2abort	0xe	/* level 2 external abort on translation */
+#define	FCtransSec	0x5	/* section translation */
+#define	FCtransPage	0x7	/* page translation */
+#define	FCdomainSec	0x9	/* section domain  */
+#define	FCdomainPage	0x11	/* page domain */
+#define	FCpermSec	0x9	/* section permissions  */
+#define	FCpermPage	0x11	/* page permissions */
+#define	FCabortLFSec	0x4	/* external abort on linefetch for section */
+#define	FCabortLFPage	0x6	/* external abort on linefetch for page */
+#define	FCabortNLFSec	0x8	/* external abort on non-linefetch for section */
+#define	FCabortNLFPage	0xa	/* external abort on non-linefetch for page */
+
+/*
+ *  PTE bits used by fault.h.  mmu.c translates them to real values.
+ */
+#define	PTEVALID	(1<<0)
+#define	PTERONLY	0	/* this is implied by the absence of PTEWRITE */
+#define	PTEWRITE	(1<<1)
+#define	PTEUNCACHED	(1<<2)
+#define PTEKERNEL	(1<<3)	/* no user access */
+
+/*
+ *  H3650 specific definitions
+ */
+#define EGPIOREGS	0x49000000	/* Additional GPIO register */