Import sources from 2011-03-30 iso image

1 files changed, 150 insertions, 0 deletions

diff --git a/sys/src/cmd/cwfs/data.c b/sys/src/cmd/cwfs/data.c
new file mode 100755
index 000000000..0f02af654
--- /dev/null
+++ b/sys/src/cmd/cwfs/data.c
@@ -0,0 +1,150 @@
+#include	"all.h"
+
+char	*errstr9p[MAXERR] =
+{
+	[Ebadspc]	"attach -- bad specifier",
+	[Efid]		"unknown fid",
+	[Echar]		"bad character in directory name",
+	[Eopen]		"read/write -- on non open fid",
+	[Ecount]	"read/write -- count too big",
+	[Ealloc]	"phase error -- directory entry not allocated",
+	[Eqid]		"phase error -- qid does not match",
+	[Eaccess]	"access permission denied",
+	[Eentry]	"directory entry not found",
+	[Emode]		"open/create -- unknown mode",
+	[Edir1]		"walk -- in a non-directory",
+	[Edir2]		"create -- in a non-directory",
+	[Ephase]	"phase error -- cannot happen",
+	[Eexist]	"create/wstat -- file exists",
+	[Edot]		"create/wstat -- . and .. illegal names",
+	[Eempty]	"remove -- directory not empty",
+	[Ebadu]		"attach -- unknown user or failed authentication",
+	[Enoattach]	"attach -- system maintenance",
+	[Ewstatb]	"wstat -- unknown bits in qid.type/mode",
+	[Ewstatd]	"wstat -- attempt to change directory",
+	[Ewstatg]	"wstat -- not in group",
+	[Ewstatl]	"wstat -- attempt to make length negative",
+	[Ewstatm]	"wstat -- attempt to change muid",
+	[Ewstato]	"wstat -- not owner or group leader",
+	[Ewstatp]	"wstat -- attempt to change qid.path",
+	[Ewstatq]	"wstat -- qid.type/dir.mode mismatch",
+	[Ewstatu]	"wstat -- not owner",
+	[Ewstatv]	"wstat -- attempt to change qid.vers",
+	[Ename]		"create/wstat -- bad character in file name",
+	[Ewalk]		"walk -- too many (system wide)",
+	[Eronly]	"file system read only",
+	[Efull]		"file system full",
+	[Eoffset]	"read/write -- offset negative",
+	[Elocked]	"open/create -- file is locked",
+	[Ebroken]	"read/write -- lock is broken",
+	[Eauth]		"attach -- authentication failed",
+	[Eauth2]	"read/write -- authentication unimplemented",
+	[Etoolong]	"name too long",
+	[Efidinuse]	"fid in use",
+	[Econvert]	"protocol botch",
+	[Eversion]	"version conversion",
+	[Eauthnone]	"auth -- user 'none' requires no authentication",
+	[Eauthdisabled]	"auth -- authentication disabled",	/* development */
+	[Eauthfile]	"auth -- out of auth files",
+	[Eedge]		"at the bleeding edge",		/* development */
+};
+
+char*	wormscode[0x80] =
+{
+	[0x00]	"no sense",
+	[0x01]	"invalid command",
+	[0x02]	"recovered error",
+	[0x03]	"illegal request",
+	[0x06]	"unit attention",
+	[0x07]	"parity error",
+	[0x08]	"message reject error",
+	[0x0a]	"copy aborted",
+	[0x0b]	"initiator detected error",
+	[0x0c]	"select re-select failed",
+	[0x0e]	"miscompare",
+
+	[0x10]	"ecc trouble occurred",
+	[0x11]	"time out error",
+	[0x12]	"controller error",
+	[0x13]	"sony i/f II hardware/firmware error",
+	[0x14]	"scsi hardware/firmware error",
+	[0x15]	"rom version unmatched error",
+	[0x16]	"logical block address out of range",
+
+	[0x20]	"command not terminated",
+	[0x21]	"drive interface parity error",
+	[0x22]	"loading trouble",
+	[0x23]	"focus trouble",
+	[0x24]	"tracking trouble",
+	[0x25]	"spindle trouble",
+	[0x26]	"slide trouble",
+	[0x27]	"skew trouble",
+	[0x28]	"head lead out",
+	[0x29]	"write modulation trouble",
+	[0x2a]	"under laser power",
+	[0x2b]	"over laser power",
+	[0x2f]	"drive error",
+
+	[0x30]	"drive power off",
+	[0x31]	"no disk in drive",
+	[0x32]	"drive not ready",
+	[0x38]	"disk already exists in drive",
+	[0x39]	"no disk in shelf",
+	[0x3a]	"disk already exists in shelf",
+
+	[0x40]	"write warning",
+	[0x41]	"write error",
+	[0x42]	"disk error",
+	[0x43]	"cannot read disk ID",
+	[0x44]	"write protect error 1",
+	[0x45]	"write protect error 2",
+	[0x46]	"disk warning",
+	[0x47]	"alternation trouble",
+
+	[0x50]	"specified address not found",
+	[0x51]	"address block not found",
+	[0x52]	"all address could not be read",
+	[0x53]	"data could not be read",
+	[0x54]	"uncorrectable read error",
+	[0x55]	"tracking error",
+	[0x56]	"write servo error",
+	[0x57]	"write monitor error",
+	[0x58]	"write verify error",
+
+	[0x60]	"no data in specified address",
+	[0x61]	"blank check failed",
+	[0x62]	"controller diagnostics failed",
+	[0x63]	"drive diagnostice failed",
+	[0x64]	"diagnostice aborted",
+	[0x67]	"juke diagnostice failed",
+	[0x68]	"z-axis servo failed",
+	[0x69]	"roter servo error",
+	[0x6a]	"hook servo error",
+	[0x6b]	"I/O self error",
+	[0x6c]	"drive 0 error",
+	[0x6d]	"drive 1 error",
+	[0x6e]	"shelf error",
+	[0x6f]	"carrier error",
+
+	[0x70]	"rob made me do it",
+	[0x71]	"out of range",
+};
+
+char*	tagnames[] =
+{
+	[Tbuck]		"Tbuck",
+	[Tdir]		"Tdir",
+	[Tfile]		"Tfile",
+	[Tfree]		"Tfree",
+	[Tind1]		"Tind1",
+	[Tind2]		"Tind2",
+#ifndef COMPAT32
+	[Tind3]		"Tind3",
+	[Tind4]		"Tind4",
+	/* add more Tind tags here ... */
+#endif
+	[Tnone]		"Tnone",
+	[Tsuper]	"Tsuper",
+	[Tvirgo]	"Tvirgo",
+	[Tcache]	"Tcache",
+};